AEICCV02 - Dire Penguins
$4.00 AEICCV02 - Dire Penguins
3D
Published 2021-02-10T10:07:46+00:00
This set, Dire Penguins, was sculpted by Nasos Maloudis. We had a request for some Dire Penguins on our Discord, and Nasos set task to purpose in their consturction. Included in this set you’ll find habitats and penguins. The terrain matches that found in the Ice Caves starter set, Patron sets and Ice Mines set. We’ve updated this set several times since release, and we’ll keep doing it until someone makes us stop.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| 发表的日期 | 10/02/2021 |
| Price | $4.00 |
| 支持自定义 | YES |
This is the 4x4 Penguin Rise from this set, painted like glacier ice. Nasos Maloudis designed this set at the request of a Discord member. I used this piece as part of my 2024 AEther Studios .Build Contest