Betty Boop
Betty Boop
3D
Published 2019-04-08T14:54:21+00:00
This image of the iconic Betty Boop is in response to a request on Reddit. I haven't had a chance to print it yet, so I ask that if any of you make this, PLEASE post a make!
-=[ EDIT ]=-
There was an error where the right eye was not high enough for the black color layer so I have fixed that and re-uploaded it. After I did this, I noticed that the original looked a little thick. I like my girls a little thick, but for those of you who do not, I have uploaded a thinner version, with 0.6mm layers instead of 1.2mm layers of the original. Please see the printing notes for the revised color change points.
This is designed so that it can be printed at either 0.2mm or 0.3mm while still allowing for easy to calculate color changes. For optimal printing pleasure, use the following colors/layers for color swaps (based on a layer height of 0.2mm):
Original Thickness Model
- Layer 0: white
- Layer 6: skin
- Layer 12: gold
- Layer 18: red
- Layer 24: black
New Thinner Version
- Layer 0: white
- Layer 3: skin
- Layer 6: gold
- Layer 9: red
- Layer 12: black
| 发表的日期 | 08/04/2019 |
| 打印工艺 | FDM |
| 复杂程度 | pages.object.complexityeasy |
| 支持自定义 | YES |
ok