Dragonhead drinkcoaster
Dragonhead drinkcoaster
3D
Published 2019-07-11T09:26:38+00:00
A dragon is a large, serpent-like legendary creature that appears in the folklore of many cultures around the world. Beliefs about dragons vary drastically by region, but dragons in western cultures since the High Middle Ages have often been depicted as winged, horned, four-legged, and capable of breathing fire. Dragons in eastern cultures are usually depicted as wingless, four-legged, serpentine creatures with above-average intelligence.
Found on Wikipediapage: https://en.wikipedia.org/wiki/Dragon
Print it with a single or multiple color, with filament or resin..and show me what you guys have made of it. I would love to see this model printed in a different color or even material.
More 3D models? Check out my growing collection: https://raimonvibe.eu/models/ 🌐✨
Explore my world of 3D prints, coding, faith, and creativity 🌱✨ at https://raimonvibe.eu/ 🔗🔥
:)
I have printed this model with Ultimaker white PLA. I used 0.2mm layer height and, 18% infill. I used a 0.4mm nozzle with my extruder at 210 degrees Celcius. I used a heated bed. To avoid the curling up at the bottom i used a brim. Don't hesitate to use your own configuration....no worries!
:)
Design steps
I picked a logo from my browser and have put it in svg format in inktscape (see video*). Opened the svg file in blender and made it a 3D object. In meshmixer i have repaired the file, using the 'Inspector' button under the 'analysis' tab. In meshmixer i have also added a drinkcoaster. I made the drinkcoaster in 123D Design using simple model techniques. You can also choose to make a template of a drinkcoaster in another program. For example: tinkercad. Than i have merged the drinkcoaster with the 3Dmodel (of the logo) after scaling the model in meshmixer. In meshmixer i have made the 'positive' file. For the negative model i have use 123design to substract the file from a drink-coaster. Saved it as a STL file and sliced it for printing. Cause the model has still some issues even after repairing it in meshmixer; i have decided to export it into Netfabb Online Service. This almost works very well after modelling something. Netfabb Online Service is a free STL repairing service. After this process i have previewed the model in my slicer (something i advice you to do before printing a model). The preview looked great with perfect (thick) lines; so i could print it without any problems.
If you would like to know how i design a 2D picture (google) into a 3D model.
Use this link:
https://www.youtube.com/watch?v=g6cmClwLhz8 (video* is under 6 min.)
2D to 3D in Blender
use this link to download blender for free: https://www.blender.org/download/
use this link to download inkscape for free: https://inkscape.org/nl/download/
| 发表的日期 | 11/07/2019 |
| 让时间去下载 | 154 - 155 分钟 |
| 材料数量 | ~23 gram |
| 尺寸大小 | 100*100*5mm |
| 支持自定义 | YES |
0.3mm layer height 15% infill