Fairy Mushroom Dice Tower
$9.90 Fairy Mushroom Dice Tower
3D
Published 2021-02-23T10:04:08+00:00
This Model was part of the Fairy Mushroom Dice Tower Kickstarter
www.kickstarter.com/projects/stratationdesign3d/3d-printable-fairy-mushroom-dice-tower
There are two files: the Tower and the Wall to keep the dice from rolling off the table.
These files are optimized for FDM PLA printing.
These files are for non-commercial personal use only.
For further information and to support my work, visit my Patreon page:
www.patreon.com/stratationdesign3d
To see my projects and support my work too:
FDM OPTIMIZED MODEL: NO SUPPORT NEEDED.
The printing tests were carried out on a Creality Ender 3 3D printer.
Time to print (Tower): Min 25h, Max 55h (Approx. 25h for a print speed of 60mm/sec, infill 10%, 0.2mm layer height, time may vary depending on 3D printer)
Time to print (Wall): Min 3h, Max 10h (Approx. 3h for a print speed of 60mm/sec, infill 10%, 0.2mm layer height, time may vary depending on 3D printer)
Dimensions (Tower): 187,30mm x 169,78mm x 226,89mm
Dimensions (Wall): 200mm x 131,22mm x 37,19mm
Material quantity (Tower): Approx. 310g PLA
Material quantity (Wall): Approx. 33g PLA
| 发表的日期 | 23/02/2021 |
| Price | $9.90 |
| 让时间去下载 | 1680 - 2880 分钟 |
| 材料数量 | 343g |
| 尺寸大小 | 187.30mm x 169.78mm x 226.89mm |
| 打印工艺 | FDM |
| 支持自定义 | YES |
Took a while because of all the details but oh man it came out so good