Mayan Temple Dice Tower
Mayan Temple Dice Tower
3D
Published 2021-02-08T10:38:36+00:00
**Check out my newest Kickstarter campaign, Furhaven! A family friendly 5e compatible RPG! (3D Printables available too!) >> http://kck.st/33FAsmD
This dice tower is from Fates End 2: Terra & Cosmos!
https://www.kickstarter.com/projects/kimbolt/fatesend2-terra-and-cosmos
Dice Towers & More!
Join us! 26 high res, SUPPORT FREE models for $38!
• 5 Sci-Fi-Inspired Dice Towers
• 5 Earth-Inspired Dice Towers
• 5 Dice Jails/vaults
• & 1 GM Screen
The Mayan Temple Dice Tower is a FREE file from this campaign.
Filenaming:
Mayan_DT_v# = Full Mayan Temple Dice Tower
Mayan_DT2_Top_v# = 2 part, top (split for smaller printers)
Mayan _DT2_Btm_v# = 2 part, bottom (split for smaller printers)
MayanTray_DH_v# = Tray, with sections to hold dice
MayanTray_Puzzle1_v# = 2 part tray, front section (split for smaller printers)
MayanTray_Puzzle2_v# = 2 part tray, back section (split for smaller printers)
3.12.21: NEW FILES:
MayanResin_ (BACK/FRONT) = test run for Saturn and MonoX resin printers.
MayanTray_Large (Front, Back) = tray without dice slots
Mayan_TrayMerged = Merged the tray and the tower as one part
3.12.21 FIXES:
I fixed some issues with the trays - some people were having a hard time getting them to fit to the tower correctly.
EASY TO PRINT! The towers will be designed to be 3D Printed easily without supports! (Supports are the WORST!)
All files will be designed to print on smaller FDM Printers like the Prusa Mini. Towers taller than 7" (about 177mm) tall will be split into two models so they’re printable on smaller printers.
These objects can be any size that your printer can support, so you can print them smaller (if you have a small printer) or larger (for large dice) if desired. All Dice towers are designed to work with standard 20mm dice at 100% scale. (*Dice set/tower scales are determined by the size of the D20 in the set.) If you can't print the towers at 100%, then print them at 60% to work with tiny 12mm dice sets (can be found in local game stores or on Amazon.) Teeeny tiny printers such as the Photon and Mars are unlikely to print the majority of dice towers AND work with existing dice. However, Dice Jails and Vaults may work, depending on size and scale.
*This tower is still a work in progress. Please let me know if you have any issues or feedback. I'll continue working to improve it till it's perfect.
*Only Merchants are permitted to sell prints of these files. If interested, please check the MERCHANT LICENCE section of the Kickstarter campaign.
No supports!
All files will be designed to print on smaller FDM Printers like the Prusa Mini. Towers taller than 7" (about 177mm) tall will be split into two models so they’re printable on smaller printers.
| 发表的日期 | 08/02/2021 |
| 支持自定义 | YES |
Easy print, turned out great. Light brown PLA color worked great for it. .16mm layers at 200/60 temps