Robot coaster (v2)
Robot coaster (v2)
3D
Published 2020-11-10T16:23:09+00:00
I have printed this model in multi-color, with a single extruder. It is also possible to print this model with one color!
More 3D models? Check out my growing collection: https://raimonvibe.eu/models/ 🌐✨
Explore my world of 3D prints, coding, faith, and creativity 🌱✨ at https://raimonvibe.eu/ 🔗🔥
I have printed this model in Fillamentum mint PLA. I have used 0.25mm layer height and 18% infill. I have used a heated bed at 55 degrees Celsius and my nozzle size is 0.4mm and was heated at 210 degrees Celsius. I have used a brim to ensure adhesion to the build plate. I have used the movement setting: 'combing not in skin' (Cura) for a smoother topsurface. I paused the print at the point when the helping robot image begins, changed filament, and resumed the print. Don't worry to use your own settings while this isn't a difficult model.
| 发表的日期 | 10/11/2020 |
| 让时间去下载 | 110 - 111 分钟 |
| 材料数量 | ~ 21 gram |
| 尺寸大小 | 100*100*5mm |
| 支持自定义 | YES |
Awesome design! Thank you for posting!