Spinning Cube
Spinning Cube
3D
Published 2014-07-24T16:32:36+00:00
This Cube with in a circle is a great mechanical desk top object to play with and a great item to show off what your 3D printer can do! The object is printed as one and spins freely once the four support pins are cut off.
_________________________________________________________________________
If you purchase this object through the MyMiniFactory Store please note:
-
This product will come unassembled and unpainted when you buy it. We encourage you to be creative, personalize it as you wish. Express your awesomeness and share a picture of the final result with us!
-
Unless you have a particular request, the colour of your print will be chosen at random and will be printed in either ABS or PLA filament.
-
Delivery time will be between 1 and 4 weeks from the moment you order the object. This is dependent on your location and the length of time the object takes to print.
-
Email info@myminifactory.com if you would like any further information or if you have any special requests.
-
Sometimes orders will be printed live on MyMiniFactory TV - check it out here.
_________________________________________________________________________
This model is printed at 0.15 mm resolution, with 10% infill and 75% scale. The support option in the slicer was not used to print the object. I designed custom support struts to help the build stabilize. The time frame of this model was 3 hours. Once the print is complete cut the custom support pins of using a pair of side cutters.
| 发表的日期 | 24/07/2014 |
| 让时间去下载 | 180 - 200 分钟 |
| 材料数量 | 38g |
| 尺寸大小 | 12cm x 7cm x 12cm |
| 复杂程度 | pages.object.complexityveryeasy |
| 支持自定义 | YES |
Print on low resolution on a Dremel 3D20.