Sylvan Aerie Hanging Bird Feeder
$4.99 Sylvan Aerie Hanging Bird Feeder
3D
Published 2025-08-18T20:29:58+00:00
By downloading this item, you agree:
Not to distribute the files
Not to sell prints of this item.
You ARE permitted to print this item as a gift. Only Merchants with an active License may print & Sell FatesEnd items.
🔗 MMF: bit.ly/FatesEndTribe
🔗 PATREON: bit.ly/FatesEndPatreon
While you're at it, check out Furhaven: bit.ly/FurhavenGame
✨ Pre-signup for Furhaven Adventures: bit.ly/FurhavenBook
════════════════════════════════════
🕊️ Sylvan Aerie – Hanging Bird Feeder! 🌙
Perched high in the forest canopy, this elegant elven feeder draws in more than just birds. From sprites and wisps to squirrel bards with a tune to share, the Sylvan Aerie is a whimsical touch for any outdoor decor or indoor display.
With gothic arches, textured woodgrain, and graceful detailing, this support-free STL is perfect for magical gardens—or just adding a little fae charm to your world. Refill it at twilight for maximum enchantment. ✨
🌿 Features:
- Support-free STL, ready to print
- Designed for light outdoor use or display
- Can be strung from above or left on a flat surface
- Modeled with elven-style architecture and forest texture
- Bonus: Makes a cozy shelter for tiny woodland minis too!
Print. Hang. Invite enchantment. 🐦🧚
════════════════════════════════════
EASY TO PRINT! Our files are designed to be 3D Printed easily without supports! (Supports are the WORST!) Due to the nature of miniatures, our miniatures & ornaments are pre-supported if needed!
Most FatesEnd files are designed to fit on a 7"x7"x7" print bed area or larger! All dice towers are designed to work with standard 20mm dice at 100% scale. (Dice set/tower scales are determined by the size of the D20 in the set.) If you need to scale the files, you may use the Dice Scale Chart found here: fatesend.net/resources
Our models are designed to be support-free for easy FDM printing—no supports needed!
- Layer Height: 0.2mm for standard prints, 0.12mm for finer details (enable Z-hop for delicate prints)
- Wall Loops: 3-4 for strength and durability
- Infill: 6-8% using gyroid pattern for optimal strength and efficiency
- Supports: Not needed! Our models are crafted for hassle-free printing
- Bed Adhesion: A well-leveled bed is usually enough, but a brim can help for extra stability
If you run into any issues or need advice, feel free to reach out! We love seeing your prints—share them with us using #FatesEnd!
| 发表的日期 | 18/08/2025 |
| Price | $4.99 |
| 尺寸大小 | 174mm x 199mm x 244mm |
| 支持自定义 | YES |