New to MyMiniFactory. I posted a Remix and it says it has to be approved. I hope it shows up :) IMO The most worthy Tippi Tree ornament can only be a Tiny Tippi Tree itself! lol

Ambition cube

Pending approval! I hope you all enjoy my Tippi puzzle fruit. Based on a Babylon tower style puzzle. Its both an ornament and fully functional mechanical puzzle.

Pending Approval!! TiPPi Lights

Here's what I came up with. It, too, is in the review process at the wonderland phase so it should be posted soon.

among us ornament

My hot end submission printed on a stock ender 3 pro

Tippi Traffic Light:

Introducing the Tippi Printi! With a build volume of 24x24x24mm, this ornamental printer won't leave you hanging!

Ti-Bee Hive:

Tippi Pickle and Tippi Dreidel!

This is the Twisty-Fruit, an homage to the original Tippy Tree's Berrys, with an extra *twist*. (Pun intended)

This is the Twisty-Fruit, an homage to the original Tippy Tree's Berrys, with an extra *twist*. (Pun intended)

The Twisty-Fruit, an homage to the original Tippy Tree's Berrys, with an extra *twist*. (Pun intended)

TKS Tankette

Tippi tree presents

This is the Tippi Hydrant! I previously designed this as my take on the leaky hydrant (Tippi Tree skin design competition) and shrunk it down to Tippi ornament size! No supports needed! Silk Red PLA Designed in fusion 360

Waiting for approval! This is the Tippi Hydrant! I previously designed this as my take on the leaky hydrant (Tippi Tree skin design competition) and shrunk it down to Tippi ornament size! No supports needed!

.

Banano Tree! 3D model originally by Beums on Printables. I edited and added the clip to the design.

Banano Tree! 3D model originally by Beums on Printables. I edited and added the clip to the design.

I updated the tankette to print upside down. The thing on the back is to add surface area to the print so it stays on, and it works. I've been waiting 2 days now for it to be reviewed and uploaded, hopefully it will be uploaded before the contest's due date.

https://www.myminifactory.com/object/3d-print-updated-tks-tankette-tippi-tree-ornament-262645 Posting the link here bc its waiting for approval. I updated the TKS to print upside down.

SPRINGO FRUIT!!! I drew inspiration from the original berries and sprigofy'd it. *That should be a word* Designed in Fusion 360

My Tipmas Ornament.

Tippi tipmas! This is the Springo Fruit

Pending approval :)

A hexasphericon ornament!

Tippi Tree Ornament - Random bunch of grapes generator

I was inspired by the fragility of Cocoon and had the idea to implement Bridge printing. I also wanted to have it light up so I endet up with this final design. hope you guys like it. sadly still waiting for https://www.myminifactory.com/object/3d-print-tippi-tree-ornament-cocoon-lamp-263969

An anvil, the idea came from my personal list of things I don't want to fallout of a tree on top of me closely behind sharks and and knife wielding maniacs. I had to make some severe compromises on the shape to accommodate for the challenge's conditions, but given my fusion 360 experience it certainly could have gone worse :)

If my model is not live on the website yet, please access it using this link: https://www.myminifactory.com/object/3d-print-263944

If my entry is not yet live, please access using this link: https://www.myminifactory.com/object/3d-print-trippi-tree-263994

my model is still pending approval. For now, please access using this link: https://www.myminifactory.com/object/3d-print-trikki-tree-263955

Hi @Devin @MakeAnything I have uploaded each file separately but it is not live yet so I am posting it over here (https://drive.google.com/drive/folders/1YXAaMhB1ruU0HZ1PprMo8Acq7BW7yLEr?usp=share_link)

This is the Tippi Bat. Hanging out with my printer. The design is currently under review. But you can access it via the following link: https://www.myminifactory.com/object/3d-print-264020

Good Luck Evrybody! My objets are: https://www.myminifactory.com/object/3d-print-tippi-tree-bird-house-tippi-tree-ornament-264032 And: https://www.myminifactory.com/object/3d-print-sleeping-bat-tippi-tree-ornament-264029 Hope I posted evrything correctly!

The last thing I need is another printer, but I couldn't myself but think of a little spider hanging from a branch, which I have coined the 'Tippi Spiddi'. I made a couple of variations in an angular 'Tippi Tree' style (well I can't sculpt anyway lol), a single piece version and a multi-part colour version. I also went and designed a 'Springi Stem' which has a thin section designed to be printed in TPU to make the Spiddi (or any other ornament for that matter) wobble and move around more. I also designed a 'Loopi Stem', to convert any Tippi ornament into a standard ornament or keychain etc. The loops were actually made from TPU filament with the ends melted against a heaterblock and fused together.

Hello, since my objects are still pending i'll put them here too: https://www.myminifactory.com/object/3d-print-264038 and: https://www.myminifactory.com/object/3d-print-a-empty-tippy-tree-bauble-264024

Pending approval: https://www.myminifactory.com/object/3d-print-stocking-ornament-tippi-tree-ornament-contest-264051 Hi everyone! I just wanted to make sure my design was up here in case it didn't get approved in time. I made a cute lil stocking ornament! I hope you guys like it.

Pending approval: https://www.myminifactory.com/object/3d-print-bodysnatcher-guitar-ornament-tippi-tree-ornament-contest-264056 Here's another ornament I made. This one is based off of a project Devin made many years ago that really inspired me: a 3D printed guitar called the Bodysnatcher. This is a pretty faithful rendition that's been modified slightly to make it printable without supports. I hope you guys like it!

Pending Approval: - myminifactory.com/object/3d-print-sprite-cranberry-ornament-tippi-tree-ornament-competion-264068 - myminifactory.com/object/3d-print-floating-island-ornament-tippi-tree-ornament-competion-264071 These are two more ornaments I did. The first is the refreshing seasonal drink Sprite Cranberry, in berry form of course as it is going on a Tippi Tree, and the second is a floating island design I came up with. I treated the stem as a waterfall and then added another waterfall and a lake so it looks like the water is continuously flowing. That's what I was going for anyways!

Hi i just uploaded a model for the competition. First ever upload, but says model under approval. A bird eating a fruit. https://www.myminifactory.com/object/3d-print-hummingbird-fruit-tippi-tree-ornament-264093