Triceratops, Articulated fidget Dinosaur, Print-In-Place, Cute Animal
$3.98 Triceratops, Articulated fidget Dinosaur, Print-In-Place, Cute Animal
3D
Published 2024-03-30T20:07:49+00:00
Introducing my Triceratops design! I've loved dinosaurs since I was a little kid. Like many kids, the Triceratops was my absolute favorite. It was really fun to make, and I'm excited to share it!
I wanted this fella to be able to hold various head poses, so I designed an updated snap-fit joint that has a snug and poseable fit. Check out a quick Demo Video Here!
Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!
Please, share photos of your makes! I would love to see them!
PLEASE READ:
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.
- Head: Snap-Fit to Body. Pre-Supported for easy printing. No additional support needed.
- Body: Print-In-Place. No additional support needed.
- Multicolor 3MF: includes multicolor 3MF file that is compatible with both PrusaSlicer and Bambu Studio
- Misc: Test Fit objects (Ball and Socket): These are trimmed down versions of the head snap fit joint. Due to tolerance variation in printers, there is a chance that the fit could be too tight or too loose. You can print these test files to either dial in your printer settings, or make fine scale adjustments of the head scale in order to find the fit that works best for you. Note, tight joints will loosen somewhat as they wear-in.
- 5%-15% Infill.
- 3 Walls.
Here's a quick demo video of the assembly!
This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.
*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.
Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.
| 发表的日期 | 30/03/2024 |
| Price | $3.98 |
| 支持自定义 | YES |
Another superb model from MatMireMakes! Unfortunately had an issue with the ball joint in the front two legs fusing so I’m unable to pose the front legs but still fantastic. First model I’ve had issues with printing at 100% scale so assuming it’s a problem on my end. Pretty sure the rainbow filament could do with a lower flow rate 🤷🏻♂️