Loading
Deadpool Bust (Remastered Supportless Edition)
3D
Published 2018-12-15T02:07:20+00:00
Awesome model :-) printed on a modded Zonestar Z5 with ECO PLA from 3DJake
Printed at full size, .15LH with a .4 nozzle on a voron v2.1 with generic black pla
Fantastic Model!! Printed really nice and it’s my first attempt to paint with the brass look.
Woow....!! My print is 80 mm
Very cool model thanks for sharing! This was printed on my little Modded Cetus mk1 with a 0.4mm nozzle at 0.2mm per layer. Filament used was vertigo galaxy at 200C and 50mm/s and 65% scale
Many thanks for this Bust. Congratulation to David. To have this result without support is amazing.
Printed beautifully considering i still havent relay dialied my my titan aero! Having troubbles with the arm regions but i guess thats because i used PETG which isnt doing to well with overhangs anyway. will try aggain soon with PLA. jsut as a tip, you only realy need infill for the first 10mm which is in the base. the rest of my print is completly hollow. cuts down print time to 12 hours with 60mm/s
Ender 3 Airbrushed, hand painted
.3mm layer height. About 9 hours of print time
Painted with an aged bronze spray paint, aged using watered down acrylics. Printed on Tronxy X1 w/ V6 clone nozzle.
AMAZING!
Awesome easy print :) Just a test print in 40%, big one is incoming :) cr-10 with Eins3D PLA, 1,2mm Layer height
Easy to print, even with the awful BQ Go PLA filament. Scaled 40% 10% 3D cross infill 0.15 layer eight Printer: Ender 3
50% scaled... 0.12layer 40mms printed on cr10 mini love this...and spidey too! thanks for sharing your stuff...
The model is super cool. Unfortunately my printer wasn't set up perfectly and I should have used a smaller layer height. I still like the final print.
Printed at 0.1mm, 10% cubic infill. 3 perimeters. 27 hours total. Timelapse video: https://www.instagram.com/p/BsPJ__OHk2_/
First long print on my mk3. Printed at .1mm layer height at 100% scale with Prusa Gray PLA. Took 48 hours.
Layer Height 0.12, .4 nozzle and using Hatchbox Red PLA. The red is a little bit to shinny, but the model is freaking awesome. Thanks to David Östman for a great job.
Such a beautiful model. Thank you.
I like the movie and this print. I can't paint for life of me and have to wear cheater glasses and steady my hand but it came out pretty good non the less. Thanks for the model.
Great job dude, im printing all your models And also doing some timelapses https://www.youtube.com/watch?v=2AChABJN0_0
Printed beautifully in Color Me 3D Purple Haze with no supports. Thank you for sharing your model!
Printed on my redesigned Anet A8 (V-Slot custom made with E3D). 0.2 Layer Height 80mm/s Speed 7 Hours Print Time
Printed on Geeetech A10 Painted with Vallejo paints
Flashforge PLA 0.1mm layer height 5% infill on my homemade i3. First time i have painted a model.
added a few more details
Hey David! Amazing demonstration of knowledge about how to model for 3d printing :) Thanks to this masterpiece I think I finally involved my cousin into 3d printing! 100mm tall 12€/kg light grey PLA 9.5h 0.1mm layers slow speeds high accels. I think the missaligned layers can be related to material quality but maybe some of you k ow better what can it be about... Thanks for sharing and keep on doing such geat models!
Printed at about 50% size, wanted to test the quality i could expect when printing on my ender 3, ended up looking so good that i went ahead and painted it, first item ive really painted!
Loved it so much I had to make another one
Love your models
Great model, this is my first time printing anything!
Just finished mine this morning!
First try
awesome file great print
The swords break on the printing, but no problem, it looks like he has empty sheaths
Thanks David Östman for providing this amazing sculpt for free. I did my best to stay true to the comic book look whilst adding the grittiness and depth that the movie adaptation lends to the character. Again, thanks David, you sir are a king amongst men.
Thanks David Östman for providing this amazing sculpt for free. I did my best to stay true to the comic book look whilst adding the grittiness and depth that the movie adaptation lends to the character. Again, thanks Mr. Östman, you sir are a king amongst men.
I hope I did justice to your work, no post processing yet. I'm a big fan. Thanks
Printer with 0% infill, 4 perimeters, 4 botom layers and 7 top layers. Worked great.
Hello guys, where is the problem please ? I have a ender 3, 0,15 et 20 unfill
0% infill, no supports. 25cm height. Once again, sorry David for the truncation...
Amazing model and result. Printed in metallic silver Plasticz Netherlands pla in 0,15 mm layers and 10% infill.
Thank you for sharing your gift with us. Your designs are amazing. I have really enjoyed work on this one.
I had to lower my cooling speed for the arms but still, it made a little mess in this area. Very nice print though. Silk silver filament from eryone, printed in 0.12mm layers, 20mms on cr10.
Love your models. They all print so beautiful especially using this silver Amazon PLA.
Sur Anet A8 pla " Ice" gris en 0.1 - pas de supports
printed at 25% size
25% infill; 34hr print; zero supports. CC3D Silk Silver filament. Thanks
Printed on a modified MK3 - Partial dryprush colored afterwards.
0.16LH 3D Jake Red Glitter PLA Was made as a bithday gift. Great model, you are very talented my sir ;)
My first print of your amazing busts. Keep up the great work
Love printing off your designs. This was my first of yours. Lovely quality. Keep up the good work
This file prints beautifully.
Rigid ink grey PLA 0.2 layer height. No part cooling fan.. Pleased with the outcome, just need to clean up the remains of supports from the base/arms ;)
Awesome Design!
It's a great modeling. Thank you.
Hi there. Model is amazing but I have a problem with my printer lately... Can somebody advise me what to do and what to check?
CoreXY Vulcanus 0.15 layer
Absolutely great design! Thank you for share us. Printed with 0.6mm nozzle, hollow after the base, Z=160mm. Aceton vapor > primer > painted > varnished
Fantastic model!
Super great modeling. Thanx for sharing :)
printed at 25% with 0.02 layer heigth
My first painted print 0.16mm layer height; 0 infill; 1.75mm walls; Hatchbox TrueRed Hand painted with acrylics; still more to paint, but need to buy some metallic silver first, and had to share
I loved learning to paint with this beauty. Printed 0.15 layer 10%infill
Impreso en mi tevo tornado y pintado a mano
love this model , painted with airbrush
0.15 layer high. Printed with the prusa i3 mk3. With prusament
Loved this model. Painted fit a friend.
More good stuff
My first painting attemp. Great model!! Thanks Eastman!!
i love this model! printed in FLSUN QQ DELTA with 0.2 layer height, 10% infill, 60 speed. i use supports in the back swords just in case because in my first attempt the sword broke from base but i was trying to print with 0% infill and was too fragile
Printed really nice with a shell thickness of just 1mm and internal lattice structure. Its about 115mm tall! Thank you!
30mm tall, 0.12mm layer height
great models mate i am slowly making one by one and so far they are perfect.thank you for your hard work so i can have this beauties in my collection
Turned out incredible! Thanks for the file... Printed at 200% 260mm X 380mm
thank you for BEST model
David your designs are simply the best. I hope there are more on the way, as i have printed them all. :) Also forced me to buy an airbrush and some good paints. :) Keep up the Awesome work.
Printing time: 20 hours
I love this Deadpool he is my first successful paint job. Thank you soo much for making this possible.
Creality CR-10S using S3D basic settings Nozzle: 200 (changed from 210) Bed: 65 (changed from 60) Adhesion: Glass bed, no glue Material: PLA (Hatchbox brand) Color: White
Dead-Pool Bust Very nice print
https://www.youtube.com/watch?v=n2VRBnOix1w Here a show how I painted, sry but it is PT-BR
Man I love that model :)
Ender 3 at .12 with no supports. Using a Hero fan and Esun Fire Engine Red filament. Took about 24 hours. I painted it (First model ever) but I really don't know what I am doing and only had some old paint pens lol.
Great Model. Thanks to the designer. Printed with an Anycubic Chiron, 0.2mm layer height, Amazon Basics Red PLA
1st of all, this is not 100%support-less, at least on a FDM machine. But with some support I got it done scaled at 280mm height, took about 57hrs to make, 600g of petg
Great model, waiting more of your models! Thanks!
Amazing render. Love it
Thanks for sharing! #monopriceminidelta got a new #pei sheet and #cura settings are updated. Deadpool bust by @eastman3d. The big deadpool got a little brother Little one printed with vanilla white #prusament on #monopriceminidelta. #3DPrinting #busts #sculptures #deadpool #marvel #myminifactory #3DPrintinglife
Done - great model, thanks David Print Time: 57h Material: PETG Weight: 610g Height: 28cm
Amazing design! Thank you!
26h 26m @ 0,1 Without supports. Thank you!!
Fine marble PLA from taiwan, Layer :0.15mm 36:46 hrs, printed by TinyBoy RA20
Muchas gracias por este espectacular diseño de Deadpool!!!
nice one, thank you
AWESOME ! 18 hours.
Hey,Really Great Model!!!How do you paint your prints? Its looks so good.Printed on Ender 3, black PLA, 5% infill, 0.2 layer height. I never had this kind of stringing, maybe the z hop contributed. Painted with spray paint: gray , gray, silver, black and black. I sanded some of the outer layer (black paint) off.
What a great job you done ! Printed it on Alfawise U30, 0.1mm, 10% infill, 74h. How do you make this grey/dark color ?
Love your models
Printed on Xinkebot Orca2 Cygnus 0.15 layer height 0.48 extrusion width 5% infil no support 8 hours
To tentando pintar. Acho que ficou bom!
I forgot to add some infill for the base lol Either way it came out great. Thanks for the model
This is for my sister in law. She will love it. Thanks.
.2 layer Hatchbox PLA 180F Hotend 65F Bed
Great work, turned out very nice. I really like your bust models.
Hey David sorry i didn't post this earlier. It still remains one of my favourite prints.
One of my favorite prints cant wait to see what else you do.. printing thanos next!
5% infill on my new creality cr 10S, no supports, came out perfect! H16cm Hobbyking filament, thank you!
Fantastic!!! Ender 3 pro !!!
Mine
Any cubic photon 0.5mm build height
Printed at a reduced size. Used the eraser in the photo for scale.
Impression en PLA rouge Ice filament. peinture acrylique
beautiful model!!!
Another great model. Thank you so much for your designs.
Fantastic bust designed by Eastman!!! Printed with RigidInk grey PLA. Around 150mm high. 0.2mm layer. 10% infill. Used supports just under the arms as a precaution. Airbrushed using an Iwata CN and Vallejo Air paints..
I f.ckn love this design. Big thanks to mr. Eastman!
Did my best. Love the model
I made a YouTube video with your modeling This is a great modeling. I support you https://www.youtube.com/watch?v=Don0wQUWVPA&feature=youtu.be
Second try, worked out pretty well. Printed without supports on ender3
Thanks for the great model.
Awesome model! Printed on an anet a8, 0.15 layer height. Zero infil, no supports 4 perimeters. 13 hours
Just Great
Capa 0,08 con nozzle de 0,4
Looks awesome. Thanks
Amazing
Your models are fantastic!!! I want more, gonna jump onto your patreon. Printed at 120%, .28 layer with a .4 nozzle, took a little over 27 hours.
Printed on the 2020 V-Baby Corexy 0,2 lh 134 mms
This is an amazing sculpture of Deadpool. It's perfect in every way. No supports, clean print and looks great painted.
Printed on Prusa i3 MK2 Bear Upgrade in 3DE Silky Copper PLA.
great sculpture. Had a blast printing it thank you
need to improve my printing
Nav camera awesome model, thanks!
Naf camera, awesome model, thanks!
Resolution: 1.15 mm No support 8 hours printing
Printed on: CR-20 Pro 0.12mm
Imprimé sur MK3 MAKER de SmartCub3D. 100 microns.
Awesome model - really straightforward print. 0.2 mm Quality setting 15% Cubic Infill Variable layer height on head and shoulders
Love this print
Such a nice model with tons of detail. Went with TMM paints with NMM methods. Successful with the grenade.. less successful with the swords.
Amazing model had allot of fun painting this one, thank you so much.
Love it
Awesome!
Layer Height 0.16 Shell Thickness 0.8 0 Fill Desity 0% Print Speed 80mm/S
125mm height @ 0.16mm, 3D Fillies Silver PLA+ Stock Ender 3, no supports. Awesome model!
Perfect design, no support no infill required :) Thanks David
Great model and easy to print, printed all superheros sculpted by David Östman before at 10 cm height, all models look great. Thanks for this model and the others David Östman! Printed on Anycubic 4Max, 0.1mm layer height and 20cm high. I have 3D printers for a while, painted a print first time. Did paint models long time ago, was nice to go back to pick up my old hobby.
Great model! Wrapped up the painting yesterday as a gift for someone.
White PLA... Matt Black spraypaint basecoat.. the rest is model acrylic paint. handpainted :)
Printed on 0.15 layer height. Beautiful model :)
Thanks fot the work!
He reducido el tamaño y sale perfecto!!
Amazing render, thank you for your work !
I printed this bust as present for my freand. Thanks to author/ It's greate model
fue un gusto pintarlo
Alfawise U30 Pro White PLA 0.16 Layer height no support about 8 hours
Cut in two Pieces to maximize dimensions. Good print, no infill, 5x 3mm drainholes on base, 2mm wall, no supports needed. I should have put a raft as i ruined the first layers to detach
Thanks
First resin print ever using my Elegoo Mars, and I'm very happy with the results. Thank you for making and sharing this awesome model to the community!
Thanks for making and sharing this awesome model to the community!
It is a fantastic model to print!
It is a fantastic model to print! Printed on elegoo mars
Wonderful model, printed .16 on and Ender 3 pro.
This came out great. Thanks for this great model as it was my first ever print. It will stay in my bookshelf for a good long while. CR-10 17:40 2mm 1.75 PLM 200/60 10% fill
This was my second print and it came out absolutely great! Amazing work and detail, thank you for sharing the model!
Printed in Geeetech Silk Gold PLA. Came out great. :-))) Layer height: 0.16 mm Height: 240 mm Print time: 29 h
This is a great piece of Art! My printed Deadpool just finished and it looks fantastic! :-) Geetech silk gold PLA; layer height: 0.16 mm; height: 240 mm; Print time: 29 h
Cool model. 100% scale 34h printed PLA Plasty mladeč 0,12mm layer
3 hours work)
Large one printed on Ender 3 (no supports, 60hrs). Resin ones printed on Photon (no supports, 5 hrs). This model is a true masterpiece! the photo's don't do the models justice. They are A+++.
Altura de capa 0.12, pos procesado con lima, resina epoxi y imprimación. Lo e pintado con acrilico.
Here's my very first print off my new Elegoo Mars. Your bust design is amazing! So if course I had to print it! My Deadpool is 3" tall! Primed black and finished with Rub n Buff silver.
Super! modell 0.2 layer, 15%infill Creality cr10s
Printed with eMarble filament for a stone statue effect
Perfect Model! 0.12 layer 15% infill + paint acryl Tamiya + PEBEO
First non-practical print, and first time painting. Printed with a few supports. Really nice model!
hello mate great model every time i slice this there are lines all in it any help would be grat
Primed ready to paint an excellent model the detail is superb thank you. & my paint job on it not upto the quality of the work done by others but Im only learning
Amazing design, thank you :)
Just finished this with my Palette 2s! 70hrs 30min.
Great Design! Made on a Creality CR-10, no support, 0.2mm, 10% infill. Marble PLA from Eryone
Assault Shuttle From Kickstarter
odel is fantastic! Printed with zero supports on the Phrozen Sonic Mini @0.05 resolution.
Thankyou David, love this print.
awesome print thanks! 0.15 layerhight 20% infill
Thanks for the file. Prints up beautifully
Used elegoo water wash clear blue resin.
PLA, 0.2, no supports. Printer: Prusa i3s Bear-like DIY
PLA, 0.2, no supports. Printer: Prusa i3s Bear-like DIY
0.15/ infil : 10% / Time: 27hours.... No supports
31h 45min Ender3
Thank you for the model, it was so much fun to paint it.
Printed at 0.2mm layer height, 15% cubic infill at 50mm/s on an Ender 3 using Eryone Sparkly Purple PLA, came out beautifully. Thanks!
Awesome model. Went with more of an X-Force vibe with my paint
Anycuibic Photon S Elegoo ABS-Like resin
Awesome, thanks a bunch! Printed in Form Futura Galaxy PLA Ruby Red at 0.05 mm layer height and scaled the model to 100 mm in height.
Great design, printed without support and looks awesome Thanks for sharing.
Printed at 210°, 0.1mm LH, 0.4mm nozzle, 3 shells (1.2mm), 5% infill, 45mm/s speed, 100% scale. Thanks for the model
Height 10cm, layer height 0.05mm, print 20hrs. Painted with basic acrylics and brush.
Thanks David Östman, excellent models. Nice to paint on these sculptures! Height 10cm, layer height 0.05mm, print 20hrs. Painted with basic acrylics and brush.
Printed with E Sun PLA+
This was my first print on me Anycubic Photon Zero and I am so happy with it! Thanks so much!
Thanks for the great model. I had a lot of fun painting him.
You can't not love a bit of Deadpool. Thanks for the print!! I even done a short timelapse of this print! http://youtu.be/me75_M_qVOk
Lower layers are fine, upper layers are fine but why is the chest part is like that? Is it because of z-hop? I used Cura 4.5.1
Lower layers are fine, upper layers are fine but why is the chest part is like that? Is it because of z-hop? I used Cura 4.5.1
Deadpool fully painted with acrylic paints - used Scale75 and GW paints
Soft used: Chitubox 1.6.3 Layer Height: 0,025 Bottom layer count: 5 Exposure time: 8s Bottom exposure time: 60s Anti-Aliasing: level4 Height 9cm Print 14h 19min
Deadpool bust (no supports) primed and ready to paint. Updated picture shown in my profile. Looks badass!
Impresso com 0.15 de altura de camada, pintura com tinta acrílica, muito bom
Impreso según los detalles del diseñador.
Impresionante modelo de este fantástico diseñador. Muchas gracias por tu trabajo.
Tried a different take, going for the variant X-force Deadpool colors on this bust using Scale75 and GW paints
Killer model!
My first 'big' print, and it turned out awesome! Well, the second time i tried. Painted it up for a mate of mine. Thanks for the great bust!
Consider me a new supporter of yours on Patreon.
Awesome design. Printed with Mk3s Filament Galaxy Silver PLA No supports at all
Great model
Hello i hope you like my Dead Pool! thanks! :3
I've just printed it and it looks AMAAAAZING!
32 hour print. Finished with tamiya putty, acrylic paints, pastel weathering, and sealed with satin clear.
Nice one man Thanks!
I recommend this model to all Deadpool fans
0,100 mm layers. Glamorous gold ICE filament
Thanks for the model!
.12 layers no supports < 10% infill i don't remember exact number painted with acrylic paint sanding/painting took about 3h
Thank you!!! This Model is Great...Excellent work... LOVE it....
Great model! Love how it printed :)
Fantástico modelo muy fácil de imprimir...
Hi Mr. Estman I would like to express my satisfaction for the magnificent models you have proposed, I don't just print them, I really like to render and color them digitally, where I can certainly give them a more captivating look. Keep it up I wish you luck. Pau
It's amazing that such a great model is free. Thank you for sharing.
Foi minha primeira impressão kkkkk e a primeira vez pintando, ta ai o resultado...
One word... Perfect...
My printing... 21 hours in my new SnapMaker 2.0 Awesome bust. I plan to prime and paint it!
This Model was a blast to paint! Thanks!
Impreso en resina, con Elegoo Mars, y pintado con aerografo y pincel. Mi primera vez pintando con aerografo.
Excellent work of art again Thank you!
Thank you. Anycubic mega zero
Printed on an ender 3 v2 at 0.12 and 50% size. 10 hours print.
muchas gracias por el archivo!
Turned out good. I think i have a few lines from not putting a vent in the base. With it being hollow and all. But it should prime pretty well for paint.
Thanks for this awesome design.
Came out perfect. Thanks alot for the fine model
Beautiful, whimsical sculpture by Eastman. So much detail!! And prints GREAT with no supports. Jessie PLA from Printed Solid and Createx Paints.
Printed at 45% and painted with Vallejo model colours.
Scale %70 infill %15 0.2mm PLA. It's amazing that a great model is free. Thank you for sharing. I plan to prime and paint it!
My first 3D Print ever. It was printed on Creality LD-002R Resin printer with no tweaked settings. Thank you for the phenomenal 3d model.
Amazing model! 1st print/paint, think ive discovered a new hobby, thanks for making such an amazing model and making available to everyone!
Great model. Colors could be better.
Espectacular figura, me he atrevido a escalarlo a 58,9mm y pintarlo, excelente busto de Deadpool, Gracias Artillery Genius
Checkout the 4K Timelapse: https://youtu.be/Fr_DjN5rTLM Thanks for the amazing model. Printed in Eryone Ultra Silk Green PLA...
Loving the result! printed at 0.2 layer height with SUNLU silk black PLA plus. No supports at all and printed in 9 hours (approx.) on my Flying Bear Ghost 5
Many thanks, looks great.
got it right on my second try! thanks @eastman I'm a huge fan of your works hope to see more of them!
Amazing Sculpt. Printed on an Anycubic Photon Mono with Aqua Blue Resin.
Nagy király vagy!!!!! Köszönöm! Many thanks! Greath!!
Pretty good model. Printed in 100mm
Nice model, my first attempt at painting a resin model. The bust is 100mm high printed on a 2k 3D Resin printer. A combination of airbrush (red) and brushes for everything else. Finished with a matt varnish
que os parece mi deadpool?
Printed on an Ender3 V2 with 3D Solutech real black filament. Turned out very nice with no supports at 0.2 print quality. Now to finish and paint. Edit: added the finished painted model. I absolutely love it.
Printed on Prusa i3 mk3 using gold eSUN filament. Turned out great without support! I hate removing supports from a model.
Elegoo Mars 2 Pro - Quanton3d Resin
First print on my new Photon Mono. Printed at 75mm tall and then I painted it.
Infill 5 procent Layer 0.15
TOP
More easy impression. Impresión facilísima.
What a beautifully finished modem you make. I airbrushed Deadpool. I am going to do this more often and I am very impressed with your work and I hope that with my airbrush I can contribute something to that.
Red PLA Black Matte finish Spray paint as base coat Craft Paint from Walmart brushed on with Kiwi black shoe polish as a wash.
Great model thank you for sharing. My first ever attempt at painting anything like this. This was painted with acrylic paint pens which limited the number of colours and detail I could get. Also it was printed at 55%scale due to the size of the build plate on the Mars Pro I don't think I have enough skill or steady hands to do the model real justice. but it was fun to do.
Спасибо большое за модель! Распечатал в 50% масштабе и раскрасил. Печатал соплом 0.4, высота слоя 0.1
Yes, its without supports, but hollow model right on the bed was resulting in high suction force on the fep. Lesson learned. I enjoyed painting anyway. Great model. Thanks
what an awesome sculpt of my favorite mavel character really enjoyed painting this one
Remixed to multicolour to timelapse. Enjoy! https://youtu.be/2HwmjdSHr-g
This is my version of this great model from Eastman. Made a How-to vídeo: https://youtu.be/I0h6Ggi-RdE
The one and only Dedpool. My first Bust i printed and paint. Love it. Thx for this Sculpt
Ohne Supports gedruckt und keinerlei Probleme dabei gehabt!
Just another one paintjob of this perfect bust.
Amazonbasics white PLA. Finished with bronze spray paint and acrylic for the eyes and deadpool logo.
thanks for the nice model... I had a lot of fun painting it...
My painted version of this amazing model
easy to print and looks great at 0.12 mm scale.
Wonderful model, it was perfect congratulations Eastman! 135mm Layer Height 0.12 5% infill Cubic No support Z-Hop 19 hours of printing but it was worth it
Printed at 0.15 layer height in my Hellbot Magana SE
A joy to paint! Printed beautifully too!
Actually Printed on Anycubic Cobra Max,....was no options for that printer: 190 nozzle 60 bed .1mm layer height 5% infill 6 walls no supports (only sagged little where arms overhang almost 3.5 days to print at 60% speed
Final shot of this bust printed on a Photon S. This was an absolute joy to paint.
Printed with petg in a prusa i3 clone
Thanks to the creator for an amazing model! First experience in painting my 15 year old daughter, painted with a brush and acrylic paints.
Very cool hiqhquality model! Works great without support.
My first experience on Resin Printing and Painting
Prints beautifully.
100mm phrozen resin @ .05