AEATLN13 - Jefekraken of the Abyss
$5.00 AEATLN13 - Jefekraken of the Abyss
3D
Published 2023-03-30T06:31:34+00:00
The Wardens of the plane of water, the guardians of the Deep Murk. They are great and giant warriors devoted to the protection of the deep places.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 30/03/2023 |
| Price | $5.00 |
| Support Free | YES |
Prints great and will add a special something to an under sea adventure.