AECATA0 – Catacombs: The Starter Cult
AECATA0 – Catacombs: The Starter Cult
3D
Published 2022-06-27T08:29:31+00:00
This set, Catacombs: The Starter Cult, is a byproduct of the “CataQuest1” by our Artists here at Aether Studios. Team Wolfilith blew Team Karlaagamar out of the water on the points score, but the patrons were the real winners. This set contains many elements from that contest. Tiles, Scatter, Minis, and a Book of Evil.
This set may seem dark, but it is in-fact a love song written for our patrons. We made this specifically because we want you to have the very best catacombs tile set ever made.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 27/06/2022 |
| Support Free | YES |
These tiles are great, i slightly modified them to work with rest of my magnetic tiles using open forge bases. Included a quick step by step look of the painting progress