AEDARK06 – Thieves Guild Crypt
$6.00 AEDARK06 – Thieves Guild Crypt
3D
Published 2023-12-22T04:34:44+00:00
Deep in the darkest part of the cemetery lies a crypt unlike any other. It holds a dark secret, a secret entrance to be exact. Leading to… only you know where…
This was a discord request from our buddy Baseeats, aka Kevin. Whom is a long time patron and a regular on Discord. A little ways back Kevin asked for this set. So of course, Nasos and I made it for Kevin because he is one of our favorite humans on this planet and because it was an inspired request from a well-loved locale.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 22/12/2023 |
| Price | $6.00 |
| Support Free | YES |