Loading
Alien - Xenomorph - Full Figure - 25 CM
3D
Published 2019-01-04T17:23:05+00:00
Alien - Xenomorph - Full Figure - 25 CM
3D
Published 2019-01-04T17:23:05+00:00
The Alien (also known as Xenomorph or Internecivus raptus "murderous thief" is a fictional endoparasitoid extraterrestrial species that is the eponymous antagonist of the Alien film series. The species made its debut in the film Alien (1979) and reappeared in the sequels Aliens (1986), Alien 3 (1992), and Alien Resurrection (1997), as well as the crossover films Alien vs. Predator (2004) and Aliens vs. Predator: Requiem (2007). It was also featured in cameo appearances in the Predator franchise entries Predator 2 (1990), Predators (2010), and The Predator (2018).
The Alien design is credited to Swiss surrealist and artist H. R. Giger, originating in a lithograph titled Necronom IV and refined for the series' first film, Alien. The practical effects for the Alien's head were designed and constructed by Italian special effects designer Carlo Rambaldi. The species' design and life cycle have been extensively augmented, sometimes inconsistently, throughout each film.
Similar creatures of a slightly different designs named the "Deacon" makes a brief appearance in the Ridley Scott film Prometheus (2012). Two species, one being a different but similar creature called a "Neomorph" and the other being a variation of the Xenomorph species appear in the sequel to Prometheus, Alien: Covenant (2017), which reveals the potential origin of the species.In addition, the Alien appears in various literature and video game spin-offs from the franchises.
Unlike many other extraterrestrial races in science fiction, the Aliens are not sapient "tool-makers"; they lack a technological civilization. They are predatory creatures with no higher goals than the propagation and self-preservation of their species. Like wasps or termites, Aliens are eusocial, with a single fertile queen breeding a caste of warriors, workers, or other specialists strains. The Aliens' biological life cycle involves traumatic implantation of endoparasitoid larvae inside living hosts; these "chestburster" larvae erupt from the host's body after a short incubation period, rapidly mature from juvenile into adulthood within hours, and seek out more hosts for implantation.
| Date published | 04/01/2019 |
Did the parts separately.
This was a 25 hour print that failed at the start twice, a problem with the bottom of the feet warping and hitting the nozzle so I raised the front up 30 degrees so the feet would print in the support material. I had been looking for an excellent xenomorph, thanks, great design!
PLA and ABS, layer 1,5, 60mm/s
Printed and painted. Wicked Color black-pearl and Vallejo Silver dry brush highlight.
Love this model, the detail is really off the charts. Thanks for sharing. printed at 200% and i would suggest to try the experimental tree support feature in cura, it saves a lot of material and time + it doesn't fall over^^
Love this model. looks good at .2 Thanks.
I've printed it in one piece on a resin printer.
A wonderful model!
Printed with Anycubic Photon. Mounted on a piece of red heart.
nice looking model
printed with inland black PLA at 200 deg. .2 resolution all except tail printed on my mini V2 the tail printed on my Geetech i3 about 25 hours total I'm very happy with this print final touch up and clear coat still to be done.
This is my attempt, now looking for inspiration for the good base for this model
Great desing!!!
First coat
Awesome model. Printed the parts on my Ultimaker 2+ with some support. The latter needed quite some time to remove though. Was well worth it :)
Set the file to 300% bigger, and is working great so far!
And there she is! Painted and ready
Printed mine with black Filament on my makerbot mini+! 20 infill, 2mm layer, with supports. Cut size to half, came out really awesome, no need for paint
Great memory of the movies from my youth. F... the aliens, marine! :-)
4 days for all parts, also a bit of work for fitting, great model
Nozzle 0.6 body; 0.2 head
Printed on The Anycubic Photon with FormFutura - Platinum LCD Series - Solid Black Resin
Lost a little of the front right elbow, support didn't work out there! I painted it with Tamiya metallic black spraypaint.
fantastic file thank you!!!! resine printer phrozen time print 860 min 50 mm quality scale 15.6 cm
Love it this is my first print
Super cool. The level of detail is just amazing. I knew when I saw first saw this model/print, it would probably be the first thing I did. And it was..twice lol. Thank you so much for sharing these models. It means a lot to someone very new with 3D printers to be able to create something like this. Great modeling work..ZBrush I assume?
12% scale
my painted model
Printed on Prusa SL1 with Wanhao Water Washable resin in 0,05mm layer hight
Finished the print today and painted, 190% Scale, love it
Super nice model, brilliant work! The full-figure came out perfect ;)
Just finished this on my Ender 5. Love the silk copper PLA. Painted it with some black spray paint, and wiped it off, leaving the paint in the nooks and crannies. I like how it came out. The edges look rougher in the photos than it does in person.
Thank you for this marvelous et gorgeous alien !
Printed in Galaxy black 160% scale
Escala 200%
My most impressive print so far. Printed at 0.12 with my heavily modified Anycubic i3 Mega using Neema3D Milkway Black EVO PLA (amazing material btw, layer lines not visible, very sturdy and easy to print). Looks magnificent, thank you for the amazing design!
Love love LOVE this file! Thank you so much!! Printed in Monoprice ABS+ Peak Green on Up Mini 2
Nice Model :-) 120% scale (30cm ) printed PLA Plasty mladeč 0,12mm layer
Stunning and beautiful model.
Great model! Here’s my first ever go at painting ...
First attempt at painting... tips?
Printed this on my Phrozen Sonic Mini. Assembled and then brush painted it with acrylics. Finished with a coat of gloss for that nice Xenomorph shine. Hope you like it.
Great model.Grey ceramic and clear blue resin. And now, the big PLA version 38 cm
I love your work. This came out fantastic!
First Print ender 3 pro
Printed on a Bibo Touch 2, with silk copper Noulei PLA. Inspired by another print here by user Kross, I touched it up with black acrylic lowlights. Thanks for the beautiful model and ideas!
Awesome model!! Instead of cleaning the print in IPA, I just cured it with the extra resin still on the model. This worked great to give it a shining/wet look.
Awesome print can't believe how well this printed out! first time on my old flashforge dual head ..printing another one for L shaped brackets for book ends !
Here is my painted version of the Alien - Xenomorph. Printed on a Form 3 at 0.1mm layer and painted with acrylics.
Hi, this is my paintjob, thanks for model.
Impresso exatamente igual, gostei muito
Printed this awesome model mini! I now have a wee army of them :D Considering how small they are they turned out awesome! Can't wait to print a bigger one.
Printed on my Peopoly Moai, using Peopoly's black resin, with a lacquer finish. It looks black in normal room lighting, but in sunlight it takes on a deep blue color. This is a great figure, thanks Printed Obsession!
Great Design!
Printed using a .25mm nozzle at .1mm layer height. Took about 50hours but turned out well. Had some difficulty getting the pieces to insert into each other.
Really love this model, thanks!!
Printed with Tronxy Ultrabot SLA, 175mm tall print, (plus 5mm for bottom supports) Great model, thanks!
Printed 0,12mm height with Ender 3 Pro using PLA. Only applied putty & sanded to aliens head for a smooth surface.
Solely registered to give you a huge hug for making this model!! Heres my version, printed on the Mars in two batches, to get the maximum size out of it. Airbrushed with acrylics, washed with black oil color and drybrushed the highlights.
Love this print!! Thanks!!
My second print after the test print.
Great print
45 cm long, PLA Plasty Mladec white, painted.
Decapitated Xenomorph painted with acrylics and modge podge. Love this model it was one of my first prints.
Now I have to build a base for it. Thanks for the great model!
Printed with scale 170% Layer tickness => 0,1 mm and 0,15 mm for tail i used custom support and intelligent placement on plate to minimize support presence.it's long to find the good adjustment but the final result it's just perfect. thanks for this model Final Size => Wahou 45cm ;) !
Printed in Amazon Basics N. Yellow .12 Layer height from 50% scale in Prusa slicer.
Printed at 90% scale. Not painted, only printed.
very nice model. I painted it color changing front to back
Silver spray paint + Black acrylic paint + Glossy Varnish spray.
love it
Printed at 250% 70 cm long, and only a base left to make
More on my creative journeys at:
Website: http://www.creativejourneys.gr
YouTube: https://www.youtube.com/channel/UCRCkvuF_oCh03GrvWeHe1HQ
Facebook: https://www.facebook.com/mycreativejourneys
thank you for the model, it made me very happy
Printed at 200% size, using tree supports in cura. Amazing results
Printed @ 63.4% (6.25 inches/158.75mm) with Siraya Tech Fast Green. Base layers @ 60 Sec. and Normal @ 13 Sec., .05 mm layer height.
Small diorama of the movie ;)
Beautiful print. I love it, thank you very much.
Printed on Elegoo Mars 2 at 5.5 inches using a 80/20 mix of clear green and black elegoo water washable resin, then finished with a gloss clear coat.
Wicked Xenomorph...
This figure is amazing. Thank you. 0.03mm of the 63% full version. I have to amputate the right arm and put on a prosthetic one. Plus the back of the head is missing.
Reorient each piece for more tree support.
thank you..... best model of Ripley Aliens
love this Model
Printed in resin, scaled down to 3cm long just so I can stick it head down somewhere in a friend's appartement as a surprise. Printed flat with medium supports (which was overkill) with Elegoo water washable grey, painted with a single but abundant coat of Citadel Shyish Purple.Edit: printed with 0.025 layers and you can actually see some very slight print lines on the thigh. Also yes, I broke one of the fingers on the right hand.
Printer - Anycubic Photon Mono Resin - Anycubic Basic Black No painting. Just 3 layers of glossy varnish for wet effect.
Airbrush, drybrush and clear coat.
Wow the file is great! And went smooth! thx! printed this one on my anycubic Photon m3. Epoxy primer, black paint, metallic-silver coat paint.
Wonderful model! Painted with metallic acryl paint and some nail polish for shine.
Fantastic model... thanks! Black primer, Vallejo black-brown base, black oil wash, Vallejo gunmetal gray dry brush highlights.
Very very goog
very good
Scaled up to 150% to max the Anycubic Mono 6K, it now measure 15 inch long. a few thin coat of black and some generous gloss finish.
Printed the entire piece on my Anycubic Photon resin printer. Great model and easy to print.