Drinkcoaster Godzilla
Drinkcoaster Godzilla
3D
Published 2020-12-02T11:52:14+00:00
NOTE! I have now added files for multimaterial printing. Made by my buddy ASLLEXICON! Check out his profile here: https://www.myminifactory.com/users/ASLLEXICON
Hello, This is a drinkcoaster with Godzilla logo.
I have printed this model in multi-color, with a single extruder. It is also possible to print this model with one color!
More 3D models? Check out my growing collection: https://raimonvibe.eu/models/ 🌐✨
Explore my world of 3D prints, coding, faith, and creativity 🌱✨ at https://raimonvibe.eu/ 🔗🔥
I have printed this model in Fillamentum electric grey & mint PLA. I have used 0.25mm layer height and 18% infill. I have used a heated bed at 55 degrees Celsius and my nozzle size is 0.4mm and was heated at 210 degrees Celsius. I have used a brim to ensure adhesion to the build plate. I have used the movement setting: 'combing not in skin' (Cura) for a smoother topsurface. I paused the print at the point where the Godzilla logo begins, changed filament, and resumed the print. Don't worry to use your own settings while this isn't a difficult model.
| Date published | 02/12/2020 |
| Benoetigte Zeit | 105 - 106 Minuten |
| Menge an Filament | ~ 22 gram |
| Dimensionen | 100*100*5mm |
| Support Free | YES |
Awesome design! Thank you for posting! My YouTube Channel: https://www.youtube.com/c/ToddOlsen Visit my website: https://StarLabs3D.com