Exclusive Flexi Factory Firefly with Magnet and cut for XL Version!
$39.95 Exclusive Flexi Factory Firefly with Magnet and cut for XL Version!
3D
Published 2026-01-02T21:33:39+00:00
This File is $3.99 with the Patreon or Tribes Membership Discount Code!!! Join Here: https://www.myminifactory.com/users/FlexiFactory
......................................................................................................
Hi everyone!
Wow, it has been fun processing through this little "lightning bug!"
I really wanted to make this month's Exclusive super customizable. So similar to the Ladybug, I kept the push-in wings which can be printed individually for a ton of color options. I also added a cut abdomen version which can be printed in GLOW!!!
What is really cool about this, is all you folks who like to gingantasize flexis, can go huge with this one AND make it glow. And there are a ton of PLA brands that glow with blacklight too.
For magnets, you can print two sizes... 8x3 magnets should be used for 100% and 6x2 magnets at 80%. Magnets are linked here: MAGNETS
Happy Printing -Dan
*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :) To join discord, go to your pinned post and click the Discord Link!
I successfully test printed between 60% and 115% for this one. You can go big, no problem. The smaller versions have the littlest legs, so use high quality materials and settings. I personally feel 70% is as small as you should go as they get quite fragile.
- Right and left wings are interchangable. Consider making them a SOLID color for AMS, because it substantially adds on time and waste.
- 8x3 magnets should be used for 100% and 6x2 magnets at 80%.
- STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
- I print with, 15% infill/gyroid, .12 or .16 layer height for quality. For the Glow pla consider more walls to make a solid glow.
- As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.
- Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List
- 1st and 3rd photo are 100% 3MF magnet and 80% magnet versions: Cookiecad Sunrise, Amolen Red/Gold Silk, Anycubic Black and Flashforge Green Glow
- 2nd and 4th photo are 100% and 80% magnet versions: Ziro Meadow Mirage
| Date published | 02/01/2026 |
| Price | $39.95 |
| Support Free | YES |
Printed 10 on one plate took over a day. Did 100% and 75%. Used glow for the butt end.