Exclusive Skeleton Jack with (2) Faces, Mini, Magnet, Keychain and XL Versions!!!
$39.95 Exclusive Skeleton Jack with (2) Faces, Mini, Magnet, Keychain and XL Versions!!!
3D
Published 2026-01-02T21:35:06+00:00
This File is $3.99 with the Patreon or Tribes Membership Discount Code!!! Join Here: https://www.myminifactory.com/users/FlexiFactory
......................................................................................................
Even though it's still Summer here in Texas (hot, hot, hot) ... starting to celebrate spooky season gives me hope that Fall is on it's way 🤣
This model just makes me smile! Even the "scary" face, which is a little mischievous and grumpy, makes for a fun Halloween duo.
You have lots of options here with STLs and 3MF project files for the following:
* Scary and Silly Keychain/Mini
* Scary and Silly Captured Magnets
* XXL Version coming VERY soon! Still finalizing the files.
Print tips and Info:
- I successfully test printed between 100% and 700% for this one. You can go big, no problem. The smaller versions have less detail and smaller joints, so consider using high quality settings and materials.
- 6x2 magnets should be used: HERE
- STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
- I print with, 15% infill/gyroid, .12 or .16 layer height for quality.
- As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate or Bambulab Supertack
- Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List
- 1st photo is 300% 3MF: Anycubic Black and Green, Overture Easy Rock White, Hatchbox Orange
- 2nd/5th photo is 100% 3MF: Amolen Marble Brick Red, Anycubic Green, Sunlu Yellow, ESun Purple
- 4th photo is 100% 3MF: Polymaker Arctic Teal, Ziro Peachy Sunrise
- 6th photo is 100% 3MF: Flashforge Luminous Purple and Green, Polymaker Luminous Orange
| Date published | 02/01/2026 |
| Price | $39.95 |
| Support Free | YES |
I have an Elegoo Centauri Carbon and use the Elegoo slicer, it does not take long and prints super well but these choices are not there in the options to put them in, sorry, this is from here, also object source, umm myminifactory lol also not an option in the choices lol