Flexi Factory Monkey, Banana and Tree with 3MF Files Included!
$4.49 Flexi Factory Monkey, Banana and Tree with 3MF Files Included!
3D
Published 2025-02-01T15:54:06+00:00
It has been so fun working through the art, styling and developing the personality of this little character. The big floppy ears, looped tail, and oversized hands and feet really make it such a joy to play with. I hope you all delight in "monkeying" around with this model ... and discovering lots of fun ways to pose and hang it, hahaha. And this character also STANDS!
The tail prints separately and slides in and locks. If you print smaller than 50%, you may need a dot of glue. The links are quite small at 50% and below.
I added the tree as a display piece and a banana for a fun prop! My wife was playing with poses for this character forever hahaha. So much fun to play with :)
Happy Printing -Dan
Included are 6 files:
- Monkey 3mf project file
- Monkey Body STL
- Monkey Tail STL
- Monkey Tree Top
- Monkey Tree Bottom
- Banana
Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!
Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.
Please feel free to share images of your prints on this page, I would love to see 'em.
Thank you.
P.S. If you like this design, Check out my other models.
https://www.myminifactory.com/users/FlexiFactory#/
Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory
*As an Amazon Associate I earn from qualifying purchases
Print tips and Info:
- STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
- I print with 3 walls, 15% infill/gyroid, .12 or .16 layer height for quality.
- As usual. make sure you have good adhesion, especially for the mini versions. I always use a glue stick.
- I test printed between 50% and 125% for this design. Consider high quality materials and settings, the smaller you go. I recommend no smaller than 60% for strength and durability.
- Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List
- 1st Photo 100% 3mf: Ziro Beach, Amolen Dry Rose Wood, Anycubic Black, Sunlu White
- 2nd Photo 60% STL and 125% STL: Amolen Yellow Feldspar
- 3rd photo 100% 3mf and 90% stl: Ziro Twilight , Ziro Beach, Amolen Dry Rose Wood, Anycubic Black, Sunlu White
- 4th photo 70% stl: Ziro Matte Rainbow Blaze
| Date published | 01/02/2025 |
| Price | $4.49 |
| Support Free | YES |
Monkey looks great... Thank u TikTok video https://www.tiktok.com/@3d.printguy/video/7449746128972614944