Flexi Factory Skeleton Brachiosaurus! with XXL and 3MF Versions!
$4.49 Flexi Factory Skeleton Brachiosaurus! with XXL and 3MF Versions!
3D
Published 2025-11-17T18:55:48+00:00
What do you do when you can't figure out how to make a Flexi Brachiosaurus neck that's also poseable? Well...you engineer a new mechanic. 🦾
After doing a crazy amount of test prints getting that neck just right, I couldn't be happier with the results. The shorter back legs and more upright head position differentiate the Brachiosaurus from the Brontosaurus, and makes it the largest of the Sauropods! I have to admit I had to research a bit to learn about the differences hahaha.
As usual, I created two head versions (with and without the eye), a stand, and since this Dino is an herbivore, A little branch it pulled from a tree. Keep your eyes open for the XXL post coming Wednesday. 👀
When Putting the neck together, make sure you separate the large and small joints first. Pay attention to the slot orientation, and snap together 4 large on the bottom, and 4 small on the top. And the neck looks amazing because of the way it prints. You can get a very similar effect to multicolor with just a gradient!
*Caution: Just like building blocks, they can be hard to get apart once you snap them together.
Happy Printing -Dan
*Please consider tagging @flexifactory/ #flexifactory in your social posts so I can see your amazing prints! AND make sure to share in the private Flexi Factory discord :) Members can join through the settings/apps tab or direct link in pinned post.
Print tips and Info:
- STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
- I print with .12 or .16 layer height for quality.
- As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.
- Consider a brim if you have concerns about the links losing adhesion, they have a small footprint. And print more than you need :)
- I successfully test printed between 50% and 370% XXL for this design.
- XXL version must be GLUED together with Super Glue.
- Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List
- 1st photo is 100% shows the neck options with 3 or 4 links. You can have some fun and try more if you like!
- 2nd photo is 110% STL : Printed in Overture Matte Brown and stained. Video Tutorial HERE
- 3rd photo is 110% 3MF : Printed in Cookiecad Sunrise, Overture Easy Rock White, iSanmate Yellow/Green
- 4th photo is has 50%, 70% and 115% STLs: Printed in Ziro Paint Splash, Tropical, Meadow Mirage and Rainbow Blaze
| Date published | 17/11/2025 |
| Price | $4.49 |
| Support Free | YES |
My xxl brachiosaurus. Printed in matte pla from bambu. Hes the perfect playmate for the xxl raptor