Flexi Factory Skeleton Mosasaurus & Squid Snack! with XXL and 3MF Included!
$4.49 Flexi Factory Skeleton Mosasaurus & Squid Snack! with XXL and 3MF Included!
3D
Published 2025-08-14T14:29:59+00:00
ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.
To legally sell PRINTED models, monthly ACTIVE membership is required through one of two available platforms below:
https://linktr.ee/flexifactory
Please help support the creative work of each 3D artist and NEVER share or sell a digital file.
....................................................
The Skeleton Mosasaurus was a blast to design with it's cool flippers, elongated and super articulated body, and of course the yummy squid snack hahaha.
And since the XXL versions are so popular, I was able to split it up to make this Ocean Skeli HUGE!
(Please see XXL printing instructions below)
There is also a stand included :)
Included in 2 Zipped Files:
Zip 1 (7 files):
- 3mf project file
- stand stl
- squid stl
- Curved body stl
- Straight body stl
- Head with eyes
- Head with no eyes
Zip 2 XXL (8 files):
- 3mf project file for cut xxl version
- Colored 3mf project file for cut XXL version
- XXL Head and neck Stl
- XXL Torso Stl
- XXL Tail Stl
- XXL Back Legs Stl
- XXL Head with Eyes Stl
- XXL Head with NO Eyes Stl
Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!
Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.
Please feel free to share images of your prints on this page, I would love to see 'em.
Thank you.
Print tips and Info:
*STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.
*I print with, 15% infill/gyroid, .12 or .16 layer height for quality.
*As usual, make sure you have good adhesion, especially for the mini versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.
*I successfully test printed between 60% and 350% XXL for this design.
*XXL version must be GLUED together with Super Glue.
If you are not using the included .3mf, simply scale up each .stl to as large as your build plate will allow. just make sure all stls fit to the desired scale before you start printing.
*Prints smaller than 100% should use the straight version provided because the curved version has tighter tolerances that may get stuck.
*Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: Amazon List
| Date published | 14/08/2025 |
| Price | $4.49 |
| Support Free | YES |