Hover APC RP-8 "Rapid Pulsar"
.png)
.png)
.png)
.png)
.png)
$19.00 Hover APC RP-8 "Rapid Pulsar"
3D
Published 2024-09-16T11:36:53+00:00
This is a part of our September release!
40% discount on STLs for all Patrons and Tribers!
patreon.com/dakkadakkastore
myminifactory.com/users/DakkaDakkaStore?show=tribe
Try before you buy: download free models, bases and bits →HERE←.
More models from this faction.
PARAMETERS
Number of STLs: 40x3 (Lychee, unsupported and pre-supported files).
Width with side turrets - 108mm
Width - 103mm
Height with turret - 78mm
Height - 61mm
Length - 150mm
Approximate resin volume: 311.1g (Elegoo Standard Resin).
Scale: 28mm
Test-printed for resin printing.
CONTACTS AND LICENSE
All rights reserved. Commercial use is provided ONLY if there is a commercial license. See our Tribe for details:
https://www.myminifactory.com/users/DakkaDakkaStore?show=tribe
https://www.patreon.com/dakkadakkastore
Join our Discord community and be sure to follow us on Instagram @dakkadakka.store not to miss any updates!
for units:
layer height - 0.03mm
exposure time - 3 sec
For vehicles and terrain:
layer height - 0.05mm
exposure time - 4 sec
| Date published | 16/09/2024 |
| Price | $19.00 |
I think I got rid of the original but I tried to support it myself, tilted it a bit and the result was the same. As you can see in the picture, the lower part of the hatch just keeps extending (and this was not depicted in the slycer).The supported version was the same (but not tilted).Hope this could help.