Loading
Medieval Fantasy House II
Published 2023-02-01T14:36:31+00:00
$5.00 Medieval Fantasy House II
Published 2023-02-01T14:36:31+00:00
🏠 Medieval Fantasy House II STL | 3D Printable Terrain | 28mm Scale | Village & Fantasy Building
Bring charm, realism, and storytelling to your tabletop with this Medieval Fantasy House II STL set. Designed with rich architectural details and a fully sculpted interior and exterior, this versatile building is perfect for villages, towns, and adventure settings. With finely detailed window frames and immersive textures, this house works as a home, shop, inn, or quest location for RPGs, wargames, and dioramas.
✅ Included in the Pack:
4 high-detail STL files
Modular Medieval Fantasy House structure
Fully detailed interior and exterior architecture
Realistic doors, windows, and wooden beams
Designed for multiple narrative and gameplay uses
Clean geometry for reliable printing
Supports recommended on window frame details
Unsupported files (manual supports suggested where needed)
Test printed for quality and fit
Compatible with resin and FDM 3D printers
Scaled for 28mm tabletop gaming
🎯 Perfect For:
Warhammer 40K
Star Wars Legion
Infinity
Stargrave
One Page Rules
D&D / Pathfinder
Dioramas / RPGs / tabletop games
🖨️ Printing Tips:
Print walls, floors, and roof separately for best results
Resin: Add light supports to window frames and thin details
FDM: Enable tree supports for window overhangs
Print flat on main surfaces for better stability
Recommended layer height: 0.12–0.2mm
Carefully remove supports to preserve fine details
📌 Usage Policy:
All STL files are for Personal Use only.
Selling, sharing, redistributing, or selling printed models is not allowed without a Commercial License.
A Commercial License is available through our affordable monthly subscription.
🛒 Visit Our Shop:
Browse our shop for more medieval houses, fantasy buildings, and modular terrain to create immersive tabletop villages and story-driven environments.
Measurements (Medieval Fantasy House II – Base):
Length: 173.25 mm (6.82 in)
Width: 187.57 mm (7.38 in)
Height: 74.64 mm (2.94 in)
Measurements (Medieval Fantasy House II – Roof):
Length: 175.63 mm (6.92 in)
Width: 185.93 mm (7.32 in)
Height: 87.32 mm (3.44 in)
*All measurements are approximately.*
medieval fantasy house STL, village house printable, DnD building terrain, RPG town scenery, tabletop house model, modular fantasy building, 28mm scale house STL, resin FDM building file, diorama fantasy house, wargaming village scenery, printable RPG terrain, medieval house STL, fantasy building download
To ensure the best results with your STL file, follow these tips:
Orientation: Position the miniature on its base or flat side to reduce supports and maintain detail.
Supports: Use minimal supports where necessary to preserve fine details and avoid warping.
Layer Height: For optimal detail, set your layer height to 0.1mm or 0.2mm.
Infill Density: A 10-20% infill density usually provides a good balance between strength and material use.
Temperature: Follow the recommended temperature settings for your filament to avoid issues with adhesion or detail loss.
Adhesion: Ensure proper bed adhesion to prevent shifting or warping during printing.
Feel free to reach out if you have any questions or need additional support. Happy printing!
| Date published | 01/02/2023 |
| Price | $5.00 |
| Support Free | YES |
Fantasy House II - 0.20mm
Sadly the two doors didnt get printed. Gorgeous house nontheless. Gj