MK XI Micro Quad Frame
Support Free
Featured
Exclusive
71,397
views
6,744
downloads
42
collections
27 comments
Loading comments... 
MK XI Micro Quad Frame
3D
Published 2017-01-17T05:54:41+00:00
878
27
Add to Collection
Description
NEWEST VERSION OF FRAME CAN BE FOUND HERE: http://bit.ly/2mGyoQ4
I have published these files for FREE download! Please go to my youtube video and hit the like button if you think this is a good frame design.
This frame is the 11th iteration in my micro quad frame design that I started designing after flying the QX90. The QX90 opened my eyes to how much fun a micro sized quad could be. I have put a lot of time into making this frame the best possible solution for anyone looking to build a sub 100mm quadcopter. A lot of crashing helped me determine the weak points in this frame and I did my best to keep weight down while also making this thing as tough as possible.
How to install electronics video can be found here: Micro Quad Electronics
BOM (ORDER THESE PARTS TO MAKE ONE)~~~~~~~~~~~~~~~~~~~~~
Spintech Brushed Motors (8.5X20):
http://amzn.to/2fXujVM
SP Racing F3 Evo Flight Controller:
http://bit.ly/2lsf0q5
Ladybird Props:
http://amzn.to/2dxYNMs
Tiny SBUS 8 CH FGrSky Rx:
http://bit.ly/2l69Svu
Crazy Pony 25mW FPV camera:
http://amzn.to/2m31YSY
Features~~~~~~~~~~~~~~~~~~~~~~
-
Frame with motor mounts Weighs 10.8 grams
-
100mm diagonal X 70mm across motor spacing fits parrot props
-
Stiff enough to keep out nasty oscillations that play tricks on flight controller
-
FPV camera protection keeps everything safe during a crash
-
Micro Losi connector hard mounted to frame to keep wires out of props
-
Motor wires are routed inside arms to keep wires from getting damaged or snagged
-
Frame arms support brushed motors from the bottom to prevent the shaft pushing the back plate off
-
Integrated flight controller standoffs make mounting electronics easy
-
Antenna passages in right side arms parallel with motor wires to keep antenna safe and out of the way
-
Designed to hold 8.5X20 brushed motors
-
Use F3 Evo Micro flight controller with the 8ch tiny Frsky Rx
Printing Details
Printing Details (MX_XIII FRAME) & (Motor_Mount)~~~~~~~~~~~~~~~~~~~~~~~~
(MX_XIII FRAME)
RECOMMENDED PRINT SETTING FOR FRAME (PLA):
(You can print this frame out of any material you want)
- 0.2mm layer height
- 225C First layer 220C rest of print
- 60C Build plate
- 60mm/s print speed
- 2 Perimeters
- 4 Top layers 3 Bottom layers
- No support
- Cooling fan on after 2nd layer
- Infill 40%
- 0.4mm Nozzle
- 0.48mm bead width
(Motor_Mount)
RECOMMENDED PRINT SETTING FOR MOTOR MOUNTS (NINJAFLEX):
(MUST BE NINJAFLEX)
- 0.2mm layer height
- 225C first layer 220C rest of print
- 12mm/s print speed
- No Support
- 100% infill
- 0.4mm Nozzle
- 0.28mm bead width (This is low because otherwise, the thin walls of the motor mount will not print)
Technical Information
| Date published | 17/01/2017 |
| Benoetigte Zeit | 50 - 60 Minuten |
| Menge an Filament | 10.7 grams |
| Dimensionen | 82X83X11 |
| Technologie | FDM |
| Schwierigkeitsgrad | pages.object.complexityeasy |
| Support Free | YES |
More Information
Object Parts
Good Job Buddy!!