Quokka, Articulated fidget figure, Print-In-Place, Cute Animal
$3.98 Quokka, Articulated fidget figure, Print-In-Place, Cute Animal
3D
Published 2024-06-01T20:26:53+00:00
Introducing my Quokka design! This adorable Australian marsupial has a reputation of being the happiest animal in the world. It's hard to argue with that when you see their cute little smiles. In honor of that, I am including two different head sculpts! One with a closed mouth smile and one with an open mouth smile.
Check out a quick Demo Video Here!
Multicolor 3mf included (works in PrusaSlicer and Bambu Studio)!!
Please, share photos of your makes! I would love to see them!
PLEASE READ:
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
If you like this design, please check out my Socials and give a follow. More designs are coming soon!
**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*
Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.
- Head (Open or Closed Mouth version!): Snap-Fit to Body. No additional support needed.
- Body: Print-In-Place. No additional support needed.
- Tail: Snap-Fit to Body. Print-In-Place. No additional support needed.
- Multicolor 3MF: includes multicolor 3MF file that is compatible with both PrusaSlicer and Bambu Studio
- Misc: Test Fit objects (Ball and Socket): These are trimmed down versions of the head snap fit joint. Due to tolerance variation in printers, there is a chance that the fit could be too tight or too loose. You can print these test files to either dial in your printer settings, or make fine adjustments of the head scale in order to find the fit that works best for you. Note, tight joints will loosen somewhat as they wear-in.
- 5%-15% Infill.
- 3 Walls.
Check out a quick Demo Video Here!
This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.
**This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.*
| Date published | 01/06/2024 |
| Price | $3.98 |
| Support Free | YES |
Thankyou for a awesome print I decided to print in a multicolour silk and it came out beautifully