Springo Skull
Support Free
Featured
58,655
views
10,926
downloads
45
collections
50 comments
Loading comments... 
Springo Skull
3D
Published 2017-05-17T07:18:37+00:00
993
50
Add to Collection
Description
What a spooky Springo!
Print at .15mm layer height and separate spring manually after printing, no supports required.
Lizenz
Printing Details
100% infill is recommended. Results vary by slicer, but basically make sure the layers above and below the small Springo gaps are printing solid. Simplify3D recognizes these as top and bottom layers so you can use a lower infill, but Cura won't recognize the layers as top/bottom, and therefor prints infill instead of solid.
Technical Information
| Date published | 17/05/2017 |
| Technologie | FDM |
| Schwierigkeitsgrad | pages.object.complexityveryeasy |
| Support Free | YES |
More Information
Object Parts
I printed it in this in PLA from Cura on my Printrbot Metal Plus. Cura crashed and lost my settings, so I'm trying my best to remember, but I think I used a .15mm layer height 15% (could have been 25%) infill, 3 top and bottom layers, I used a box cutter inserted it into one of the slits and gradually turned the part pushing the part into the blade, not the blade into the part. I cam apart easier than I thought, but it still takes some time. I probably took me 5-10 mins to split mine apart. Otherwise, it looks great. I'll be bringing this to the STEAM Maker Fest in San Diego this summer. I think kids it'll get a kick out of it. Thanks Devin!