The Guardian Napkin Holder
.jpg)
The Guardian Napkin Holder
3D
Published 2024-09-24T08:56:41+00:00
Why pay for this single file when you have over one thousand more for a lot less? That’s right. STLFLIX is a multi-theme ever-growing library of STL files. Your One-Stop-Shop for Premium 3D-Printing models. Get started with the Ultimate STL platform!
Defending your table in mythic style.
This STL file is recommended for FDM Printers!
3D Printing Time Based on Ender 3: 1 Day 22 Hours 19 Minutes (will vary accord to you printer model)
Approximately Height: 12 cm
RECOMMENDED NAPKIN SIZE
9,5cm x 9,5cm
**COPYRIGHT & SELLING RIGHTS**
This STL file is copyrighted by **STLFLIX©**, the Ultimate STL Subscription. This means you can print it for yourself, but you *DO NOT* have the right to sell it.
To acquire copyright & selling rights, you must subscribe to our Commercial License. By doing so, you will also get immediate access to over 500 STL files, unlimited downloads, and marketing content for every single file.
Go commercial and skyrocket your own store with **STLFLIX**!
**USEFUL LINKS**
Get to know us a little better!
[Website] | [Instagram] | [TikTok] | [Twitter]
What are you waiting for? Join thousands of other makers from all around the world.
**HAPPY PRINTING!**
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height: 0.16 mm
Recommended Layer Height: 0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
| Date published | 24/09/2024 |
My son is going to flip! It turned out so good and will look amazing in his apartment.