3D Printed Wearable Cosplay Wing Set!

3D File Logo  3D

Published 2019-07-17T12:27:53+00:00

    3D Printed Wearable Cosplay Wing Set! image
    3D Printed Wearable Cosplay Wing Set! image
    3D Printed Wearable Cosplay Wing Set! image
Loader
  1. Juegos y juguetes>
  2. Mechanical Marvels
Destacado
77,112 visitas
66 colecciones
Imágenes de la comunidad Añadir tu imágen
Loader
  • Picture of print of 3D Printed Wearable Cosplay Wing Set!
  • Picture of print of 3D Printed Wearable Cosplay Wing Set!
  • Picture of print of 3D Printed Wearable Cosplay Wing Set!
32 comentarios
    Cargando comentarios...

    $12.00 3D Printed Wearable Cosplay Wing Set!

    3D File Logo  3D

    Published 2019-07-17T12:27:53+00:00

    PropShopNYC

    @propshopnyc

    11 objetos

    222 Seguidores
    Añadir archivos al carrito $12.00
    +VAT/Sales Tax (if applicable)
    hasta el 90% para el diseñador
    (excluding payment processing fees)
    815 32 Add to Collection
    Descripción

    This is a wearable and functional wing kit for all your cosplay and con needs! We designed and built this kit for a personal cosplay project but were so happy with the results, we had to make it available to the world. When fully extended, the wings are over 8.5 ft (2.6 m), and collapse to just over 1.6 ft (0.5 m). These things are HUGE! You can see the motion here on our Instagram Post: https://www.instagram.com/p/B0JKb-PnGgZ/

    This was designed in Fusion 360, and was made to work with readily available and accesible components. It doesn't require pneumatics or a massive motor, and should be able to support decent weight thanks to the aluminum framing and spring assistance. A full BOM is included in the assembly instructions, found here, http://bit.ly/30JoxgG

    We sell a kit on our Etsy Page that contains all the purchased hardware which can be found here https://etsy.me/2OezTIe

    We hope this design will act as a "skeleton" for YOUR cosplay creation. PLEASE post pictures and videos of what you make! We cannot wait to see it! 

    Mostrar más Mostrar menos
    Licencia
    Detalles de impresión

    When printing the joints, please keep in mind these are structural parts! Meaning they should be printed with at least 4-5 walls, and 100% infill. If they are printed with less plastic, the risk of them breaking during use increases. 

    Información técnica
    Date published 17/07/2019
    Precio $12.00
    Más información
    Archivos
    Bottom Linear Guide.stl 130 KB
    Cover.stl 659 KB
    Double Yoke.stl (Repaired) 100 KB
    Pulley.stl 160 KB
    Shuttle.stl 1 MB
    Tang.stl 313 KB
    Top Rod Guide.stl 925 KB
    Yoke.stl 1 MB
    Etiquetas
    mechanical skeleton wearable wings cosplay steampunk Angel Fusion360 WingKit
    Objetos interesantes para ti
    Mostrar más