Adorable Articulated Axolotl, Print-In-Place Body, Snap-Fit Head, Cute Flexi
$3.48 Adorable Articulated Axolotl, Print-In-Place Body, Snap-Fit Head, Cute Flexi
3D
Published 2022-08-01T13:14:44+00:00
I hope you enjoy this articulated Axolotl! My goal was to create a cute critter with carefully designed articulations that will pose nicely, wiggle just right, and put smiles on peoples faces. Print in different sizes, colors, or create unique paint jobs to make your own unique Axolotl family!
Please, share photos of your makes! I would love to see them!
Here is a quick video showing the easiest method for removing the Head Pre-Supports and Snap-Fitting the Head onto the Body: https://youtu.be/756NelvqtCk
Please review the printing details section for optimal print setup.
PLEASE READ:
All MatMire_Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.
*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.
Includes 5 STL files:
*Recommended:
- Head with Pre-Supports: Easily Snap-Fit to Body. Built-in removable supports. No need to generate supports in the slicer!
- Body with Pre-Supported Tail & Custom Brims: Built-in removable brims, and supports on the tail for extra security
*Extras:
- Head (Easily Snap-Fit to Body, Requires Supports)
- Body with Custom Brims (Print-in-Place, Brim geo is built in so no need to generate one.)
- Body (Print-In-Place, No Supports - aside from a brim/raft for bed adhesion, if needed. Use one of the above versions if having adhesion issues.)
If the custom brim shapes aren't showing up in your slice, try lowering your Initial/First Layer Height.
15-20% Infill.
3 Walls.
Though I highly recommend using the pre-supported files, and not generating supports in the slicer, some people may prefer to. For a demonstration of how I use Cura's support blockers to print the Head and Body at the same time, please check out this video. It's super easy!
https://tinyurl.com/mr3zkyue
Scale to your liking! 100% creates a 10" Axolotl, so that will make it easy to scale it to your desired size. (80% = 8", 75% = 7.5", etc.) Depending on your printer tolerances, you should be able to print close to 60-65% before the joint function may start to become compromised. YMMV
| Date published | 01/08/2022 |
| Precio | $3.48 |
too much support, steep angles. Not 3D printer friendly. Maybe on sls 3d printer.