AEAACH03 - The Gnolls of Wargmaven
$6.00 AEAACH03 - The Gnolls of Wargmaven
3D
Published 2021-01-04T15:53:51+00:00
This set of 3D-printable STL miniatures and terrain brings a Gnoll party to life. It includes a Gnoll Chief, Brute, and Scout, as well as their camp site. Two of the gnoll miniatures should be printed with supports, and the supports are built into the models -- simply remove them after printing.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
| Date published | 04/01/2021 |
| Precio | $6.00 |
