AEAACH04 - Orcs of the Bonestew Tribe
$6.00 AEAACH04 - Orcs of the Bonestew Tribe
3D
Published 2021-01-04T15:54:02+00:00
This set of 3D-printable STL miniatures and terrain brings an Orc tribe to life. It includes:
An Orc smith (two versions provided, with built-in supports for FDM and resin printers)
An Orc warrior
The Orc king's throne, with or without the king himself
An Orc hut
An Orc watchtower
You can also keep up to date with our new releases by following our Facebook page.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
| Date published | 04/01/2021 |
| Precio | $6.00 |
| Sin apoyo | YES |
Barricades from Orcs of the Bonestew Tribe collection. Printed on Sovol SV06, resized to 2 inch width. Painted with Army Painter and craft store acrylics. Miniatures and other terrain pre-painted.