AEAADV10 - The Gate of Rub'aii
$4.00 AEAADV10 - The Gate of Rub'aii
3D
Published 2021-01-04T16:03:43+00:00
This set of 3D-printable scatter terrain from Nasos Maloudis features a giant working door for your Big Bad Evil Guys. In the World of Aach'yn lore, those taken through the Gate of Rub'aii are never seen again. Will your players be the first to conquer the Demonprince of Fear? This set has been updated since the 1st release with additional models to match our Ground Cliffs from Sky Islands 1 & 2.
You can also keep up to date with our new releases by following our Facebook page.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
| Date published | 04/01/2021 |
| Precio | $4.00 |
| Sin apoyo | YES |
Fully working hinges clean up quickly and work very well. After you…