AECAVE01-F - Flowing Falls Caverns
$3.00 AECAVE01-F - Flowing Falls Caverns
3D
Published 2026-01-18T04:26:11+00:00
Our team voted early in 2026 to stick to specific themes for the year. For this illustrious year, The Director choose Caverns. This set is the result of that choice and our continuing effort to republish our caverns with OpenLOCK base options and new tiles in every set. Our original cavern sets were huge, with hundreds of models and size limits that made our publishers (and their IT staff) cry across continents. We’ve made an effort to keep these reworks reasonably sized, but full of all the adventure that the originals had, and more.
Thank you for your support of Aether Studios. We can’t tell you how much we appreciate the place you’ve saved for us at your table.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.16mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 18/01/2026 |
| Precio | $3.00 |
| Sin apoyo | YES |