AEDOCK01 - Port Elizabeth Harbor
$5.00 AEDOCK01 - Port Elizabeth Harbor
3D
Published 2023-01-27T16:53:58+00:00
This set, Dockyards, was one of our first big projects as a studio. Colin and Will double-teamed it back in August/September of 2018. Since then it has has dozens of expansions and updates. The Port Elizabeth Harbor set is the latest evolution, replacing the original 8 Dockyards sets with one Master set.
This set features over 120 models of traditional stone and wood pier docks on our new Oceanwater terrain. Sewer transitions, Hills and beaches, and tons of hidden goodies lay within. We hope you enjoy this set, we surely enjoyed making it.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 27/01/2023 |
| Precio | $5.00 |
| Sin apoyo | YES |
Here are some tiles I remixed to be 8x8 from the tiles in this set.