AEDOCK16 - Dockyard Sewers
$9.00 AEDOCK16 - Dockyard Sewers
3D
Published 2024-08-31T19:19:45+00:00
Dockyards, was one of our first big projects as a studio. Colin and Will double-teamed it back in August/September of 2018 and here in 2024 it just keeps growing! The Dockyards Sewers adds over 75 models terrain, allowing you for a classic stone and sewage experience with endless possibilities! Colin Christenson did this entire set, every single sculpt and every single tile. Windy did the renders, and Will formatted and published it. This was one of 11 sets released in August 2024 for our patrons and tribesfolk.
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 31/08/2024 |
| Precio | $9.00 |
| Sin apoyo | YES |
Easy to print and wonderful to paint.