AEDWRF06 – Dwarven Kingdom Ruins 1
$2.00 AEDWRF06 – Dwarven Kingdom Ruins 1
3D
Published 2022-07-05T03:40:37+00:00
This set of 3D-printable STL terrain is an expansion of the core Dwarven Holds set. Because let’s face it — most of the Dwarven Holds were overrun centuries ago. They’re nice and all, but they’re not in exactly tip-top shape. You might find Orcs, Goblins, Kobolds, or Troglodytes, maybe even the occasional Ogre or Ettin… and they all seem to have left the cleaning staff behind. So, bring on the ruins.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 05/07/2022 |
| Precio | $2.00 |
| Sin apoyo | YES |
The built-in scatter of the ruined columns is a little difficult to paint, but ends up looking really nice with a judicious dry brush to push the inbuilt shadows