AEDWRF32 - Dwarven Kingdom Promenade
$9.00 AEDWRF32 - Dwarven Kingdom Promenade
3D
Published 2023-04-27T22:04:17+00:00
This set of Dwarven Terrain has been in progress for almost three years. For most of that time we kept it as a patron-only project, working on requests and making special models to match our electro-rail trains series.
This set exists because of one person: Patrick Strobbe. There is not enough space here, nor words of praise in English, to properly describe Patrick. Patrick has tirelessly worked on projects for our backers, filling countless requests and going at every challenge with a "never say die" attitude.
The Dwarven Promenade will never be finished. We will be adding more to this set, requests and updates, forever. But now we hope you enjoy these most carefully tended models from Patricks' years of work. It is our honor to publish them now.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
MINIATURE RECOMMENDED PRINT SETTINGS
This set includes both unsupported and presupported miniatures using the Lychee Slicer. It also includes a Lychee save so you can modify the supported sections further.
| Date published | 27/04/2023 |
| Precio | $9.00 |
| Sin apoyo | YES |
Gurk Son of Gurk painted by Miss Windy, painted by hand with love & care!