AEFANT02 - Mage Tower
$8.00 AEFANT02 - Mage Tower
3D
Published 2020-08-17T14:50:13+00:00
This set, Fantasy Villages Mage Tower, was a reward for the 1st full month of the Aether Studios Patreon. Originally, I wanted to make it open-air style for encounter utility. I really love the style of it, and I hope you do too.
As we republish this set for the 2nd time, I want to thank all the patrons for 86 wonderful months of publishing since the first release. A special note of thanks to James Peterson, who printed the original Mage Tower for his village.
Years since the original release, we’ve given this one the “glow up” it rightly deserved. This time we didn’t do it alone. Carl Csúrgó and Gyula Pónusz helped a ton with new sculpts while helping us keep the original concept.
NOTE: This set requires the use of a large bed with approximiately 220x220 bed space to print the roof.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim is helpful for the Pillar models
| Date published | 17/08/2020 |
| Precio | $8.00 |
| Sin apoyo | YES |
The Mage Tower, brought to life by Nasos Maloudis. A grand example of standing architecture! The winding stairs are amazing!