AEHDGE09 - Hedge Maze LED Wall
1,609
visitas
355
descargas
27
colecciones
0 comentarios
Cargando comentarios...
AEHDGE09 - Hedge Maze LED Wall
3D
Published 2023-01-05T16:44:26+00:00
44
0
Add to Collection
Descripción
This Dragonbite compatible LED Wall is made to match our Hedge Maze series of terrain. You can pick up a free starter set to go with this LED wall right here. You will need an LED diode, a CR2032 battery, and a few magnets (or bluetack) to hold the faceplate in place.
Licencia
Detalles de impresión
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
Información técnica
| Date published | 05/01/2023 |
| Sin apoyo | YES |
Más información
Archivos
