AEHELL0 – Abbadon The First Hell
$2.00 AEHELL0 – Abbadon The First Hell
3D
Published 2022-06-24T07:56:08+00:00
Please check out this complimentary free set that pairs perfectly with this one.
Abbadon was first created by Vaidas Okunis in 2020. He spent most of 2021 building it up and growing it into a 1st class set of terrain for Hell adventures. Abbadon is a different kind of terrain set than we’ve worked on in the past. It is fully Dragonbite and OpenLOCK compatible, but the design philosophy integrates stacking tiles in a new and unique way for the “chiclet” style floor tiles. This set is very organic and alive, and the expansion plans tack towards a sci-fi wind. We hope you will enjoy your excursion into Abbadon!
Brought to you by an amazing team, Vaidas Okunis, Nasos Maloudis, Károly Csúrgó, Marc Weatherhogg, Will Walker
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 24/06/2022 |
| Precio | $2.00 |
| Sin apoyo | YES |
Vaidas Okunis first imagined the first hell, and here it is Abbadon! Edward Emanuel was the painter behind this beauty!