AEPWAR01-A - War Trenches 1
$3.00 AEPWAR01-A - War Trenches 1
3D
Published 2023-01-31T10:22:32+00:00
Please check out this complimentary free set that pairs perfectly with this one.
The War series of terrain was created by Colin Christenson. War Trenches is based on our 2nd published set, Peaceful Gardens, and the Grass (Dirt) tileset. For 2026, Colin chose War as one of his two focused sets. This set reflects that choice, and our ongoing commitment to update our sets to the latest dual-publishing OpenLOCK and Dragonbite standard.
We hate that we love making war, but we do. Atleast until such a time comes that wargames and history are the sole province.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Larger Terrain pieces can suffer with lightning infill.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 31/01/2023 |
| Precio | $3.00 |
| Sin apoyo | YES |
Printed and painted by Windy Trusty