AESERA05 - Seraphim: Bathhouse
$3.00 AESERA05 - Seraphim: Bathhouse
3D
Published 2021-01-11T10:58:41+00:00
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes water tiles with decorative steps and walls to create the ultimate angelic bathhouse.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 11/01/2021 |
| Precio | $3.00 |
| Sin apoyo | YES |
Seraphim Bathhouse painted as [fantasy] dark blue marble. The water area was painted as white-green marble instead of water, and a two part resin was poured overtop.