Bunny Rabbit Articulated figure, Print-In-Place, Cute Flexi
$3.98 Bunny Rabbit Articulated figure, Print-In-Place, Cute Flexi
3D
Published 2023-03-04T22:13:20+00:00
UPDATED: Multicolor 3MF files now included!
Introducing the articulated Bunny Rabbit!!
I'm excited to share this new design! This is 100% Print-in-place, where one body part pre-supports another as it builds upwards. No additional supports needed! Once printed, you just have to wiggle the joints to break the small contact points and free up the articulation (see video).
Please watch This Video on the best way to free up the joints after printing! Be use extra care when printing in more brittle filaments like silks. Please use 3 walls if you use a 0.4mm nozzle!
Please, share photos of your makes! I would love to see them!
PLEASE READ:
All MatMire Makes Designs are protected under Copyright Law.
Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way. This includes altered or "remixed" versions of the designs. Prints of the design cannot be sold without authorization.
To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe.
If you like this design, please checkout my Socials and give a follow. More designs are coming soon!
Warning: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Furthermore, broken 3D printed parts can create sharp edges and/or points. Not recommended for children under 3.
- Print-In-Place. No additional supports needed. Several joints must be wiggled and "cracked" free in order to articulate them. Be Extra careful with brittle filaments, like silks
- Pre-supported version included for extra print stability (recommended). Support is connected to the front legs that must be removed and discarded.
- Multicolor 3MF: Compatible with PrusaSlicer and Bambu Studio
- 15%-20% Infill.
- 3 Walls when using a 0.4mm nozzle <--This is very important!
- Please watch This Video on the best way to free up the joints!
This model has been successfully printed down to 50%. Below that the joint function may start to become compromised. YMMV
| Date published | 04/03/2023 |
| Precio | $3.98 |
| Sin apoyo | YES |
80% in Eyrone Dual Blue Green