Calibration files
1,920
visitas
315
descargas
7
colecciones
8 comentarios
Cargando comentarios...
Calibration files
3D
Published 2023-09-19T19:47:33+00:00
12
8
Add to Collection
Descripción
CALIBRATION FILES FOR THE BOARDING ACTIONS "SPACEWRECK" TERRAIN
liinks to THE FILES
These are the calibration files you need to print in order to sellect what set of files you are going to print.
You'll need to calibrate your printer to the best of your hablilites, then print this file, and select witch of the two modes (LOOSE or TIGHT) fits better your current print settings.
As long as nothing changes (humidity, material, print condition) you will be able to print new pieces for the set knowing for sure that they will fit with the rest of your terrain pieces.
Licencia
Detalles de impresión
Printer: Bambu Lab P1p 0.4 Nozzle
- First Layer Speed 50 mm/s
- Outer Wall Speed 200 mm/s
- Inner Wall Speed 300 mm/s
- Top Surface Speed 50 mm/s
- Overhang Speed 50 mm/s
- Supports Disabled
- Brim Disabled
- Layer Height 0.34
- First Layer Height 0.34
- First Layer Line Width 0.5
- Outer Wall Line Width 0.4
- Inner Wall Line Width 0.45
- Top Surface Line Width 0.42
- Wall Loops 2
- Top Shell Layers 3
- Bottom Shell Layers 3
- Infill 0%
Información técnica
| Date published | 19/09/2023 |
| Sin apoyo | YES |
Más información
Archivos
Printed on my Phrozen Sonic Mini 4k at 30 µm layer height. Fantastic model, and the hinges work perfectly! Everything fits nicely together and I didn't need supports either. Thanks for sharing this so that I could try before purchasing :)