Cheese Boxed Mouse
$3.99 Cheese Boxed Mouse
3D
Published 2022-10-06T14:08:10+00:00
Mouse and Cheese Box!!
Both are print in place with no support and no assembly required. Just slice and print!
Feel free to scale them up or down as much as you want (the limit is your printer).
After printing, just move the articulations to get them free. The Cheese Box has a couple of holes for optional magnets (6 x 1.5 mm at default scale). The Cheese Box joints are meant to be tight. If you have any issues with them fusing together or being too loose, feel free to adjust the XY expansion on the slicer.
A good first layer is mandatory for the print to succeed. Be sure your printer is calibrated and you have good bed adhesion. I recommend a slow and thick first layer (8 mm/s and 0.3 mm).
Good layer cooling is also recommended, as it prevents curling and warping on overhangs.
For more tips, take a look at my printing tips.
| Date published | 06/10/2022 |
| Precio | $3.99 |
| Sin apoyo | YES |
in 4 attempts printing this cheese box, the hinges freeze/meld in place, making the lid inoperable. The attempts were printed on a Creality Ender 5, 40mms, 15% infill. As last resort, tried reducing line width from .42 & .44 to .40, but the frozen joint occurred again.