CNC Clamp 2mm to 18mm
CNC Clamp 2mm to 18mm
3D
Published 2019-09-10T15:00:16+00:00
Clamps for holding down your workpiece on a cnc router. The clamps are designed for holding down materials with a thickness of 2mm to 18 mm.
There are 2 different sizes for the bolt that goes through, M5 or M6.
Best is to use a washer on top.
The actual foot to hold your workpiece can rotate to adjust to the thickness of your material.
This clamp can be used on a wastboard like this: https://www.youtube.com/watch?v=yhVW6Q9o-34 or on v-slots with an added drop in t-nut.
Parts to add:
1 bolt per clamp M5 or M6 also the lenght is depending on your wasteboard.
1 washer per clamp
In case of v-slots 1 drop in t-nut per clamp
Print the clamp on its side. Do not use support !!
Print with PETG
Use 0.15mm resolution.
Use 4 Perimeters for strenght.
Make sure your printer is setup well. The foot of the clamp can rotate and there is not much clearence between the parts.
Do NOT use supports.
| Date published | 10/09/2019 |
| ¿Cuándo tiempo lleva? | - 120 minutos |
| Cantidad de filamento | 24 gram |
| Sin apoyo | YES |