Cthulupid Miniature
$2.99 Cthulupid Miniature
3D
Published 2025-01-01T14:01:47+00:00
By downloading, you agree: 1️⃣ No file sharing 2️⃣ No selling prints (however, printed gifts are okay!) To sell FatesEnd items, you can get a License here: 🔗 MMF: bit.ly/FatesEndTribe 🔗 Patreon: bit.ly/FatesEndPatreon ════════════════════════════════════
Bring eldritch love to your tabletop with the Cthulupid Miniature! Perfect for Valentine’s-themed campaigns or as a unique addition to your mini collection, this adorable and detailed figure captures the essence of Hugs & Hisses.
Add this charming Cthulupid to your next adventure and let the love (or chaos) begin!
Our files are designed to be 3D printed easily without supports (unless stated otherwise in the file name). Due to the nature of miniatures, our miniatures (and some ornaments) are pre-supported if needed!
We recommend printing at 0.12 layer height, 8% infill, and to use a brim if you have items that are snapping off of the print bed. If you have any items that get broken during printing, enable Zhop/Zlift to prevent the nozzle from smacking into things. :-)
Most FatesEnd files are designed to fit on a 7"x7"x7" print bed area or larger.
All dice towers and dice vaults are designed to work with standard 20mm dice at 100% scale. (*Dice set/tower scales are determined by the size of the D20 in the set.) If you need to scale the files, you may use the Dice Scale Chart found here: https://www.fatesend.net/resources
MAGNETS: 5mm x 2mm. We purchased ours on Amazon.
PEGS: You can use these pegs instead of magnets (free file): https://www.myminifactory.com/object/3d-print-peg-alternative-for-5x2-mm-magnets-258824
OR any 5mm x 2mm cylinder will do.
══════ COPYRIGHT INFO ════════════════════════════
© Kimbolt LLC 2024. All rights reserved.
These files are licensed under a Standard Digital File License. You cannot share, sub-license, sell, rent, host, transfer, or distribute the digital or 3D printed versions of this object in any form. This includes any remixes or hosting on other platforms. You also cannot use these objects to make money or charge fees without permission. Only merchants with an active license may sell prints of these items.
| Date published | 01/01/2025 |
| Precio | $2.99 |
| Sin apoyo | YES |
I painted the eyes red then covered them with a red glow in the dark pigment. UV light makes them light up bright red, it also a little creepy when you turn the lights off at night 😁