Cute Flexi Print-in-Place Squirrel Now with 3MF Files Included
$3.49 Cute Flexi Print-in-Place Squirrel Now with 3MF Files Included
3D
Published 2022-06-21T09:06:55+00:00
Updated 1_23_2024: Added Prusa And Bambu 3mf Files for your convenience. Please note these designs were not created for easier coloring, so I have provided a colored version as a project starting point. Happy Printing- Dan
This Flexi Squirrel is an articulated print-in-place model that needs NO supports.
I created 2 Versions. A short tail and a long tail version. The long tail version curls and sits up. The short tail version doesn't curl up but in my opinion is more fun as a fidget toy.
Included are 4 STL's
*Flexi Squirrel_Curved_Long Tail
*Flexi Squirrel_Straight_Long Tail
*Flexi Squirrel_Curved_Short Tail
*Flexi Squirrel_Straight_Short Tail
Like with all my Flexi's, I went through several iterations to make sure it was strong, and easy to print without supports.
Please feel free to share images of your prints on this page, I would love to see 'em.
Thank you.
P.S. If you like my Flexi Squirrel, Check out my other models.
myminifactory.com/users/dansopala
*No Supports
*Print-in-place (no assembly)
*15-20% infill to be safe
*I always like to use 3 walls
*PLA works great
*make sure you have good bed adhesion if you are printing small (but don't go too small)
When removing the squirrel from the bed, be careful with the front legs, they may break if you try pulling it off the bed. Instead, I find it best to pop them off the plate with the putty knife flat on the bed. Pop them towards the body.
| Date published | 21/06/2022 |
| Precio | $3.49 |
| Sin apoyo | YES |
Flexi dolphin standing on top of flexi squirrel