Fae Wolf Dragon
$4.00 Fae Wolf Dragon
3D
Published 2024-07-31T16:14:28+00:00
3mf submitted by SolSparks Creations
2 color 3mf submitted by Birbz
Hi, I'm Tracy! Veteran, full-time mom, and entrepreneur at heart! I love creating unique and fun designs!
This design (like all Cinderwing3D designs) is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially.
If you would like to legally sell them commercially, please join my Tribe or my Patreon and subscribe to the tier for commercial resale. Link Below!
The Digital files are never to be re-sold, shared, or given away!
Please share images of your creations here by clicking on +Add your picture! I would love to see them! :)
Commercial License and monthly bonus models:
Tribes
Patreon
Please see our other public models here:
The Cinderwing3D MMF Store
Check us out on our socials!
Facebook | Twitter | Instagram | Tiktok
FDM Settings
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
Resin Settings
No supports, flat on plate
50 um layer thickness
Light off delay can be helpful to let resin drip from links.
Proper bottom exposure tuning is recommended. Models, particularly in clear resins, can suffer from overexposure and fused links. The Ameralabs Town
testing is highly recommended to tune your settings as to get proper articulated prints! Exposure varies greatly between resins, printers, and environments.
IMPORTANT
Wings failing? Here are some suggestions:
NOTE: this is geared towards Bambu printers, as these have mostly been the ones having issues. However, many of the general principles should be applicable to other printers as well.
- Make sure your cooling is at 100% when printing PLA. On the A1 series printers, the part fan cooling defaults to 80%. Go into filament settings and set that to 100% anytime you are printing PLA
- Slow down your overhangs! Find the speeds that we suggest in the image below
- Use a brim. Recommended brim settings: gap of 0.2-0.4mm, width of 5-6mm
- If using a textured PEI plate, make sure it is clean. Wash it with soap and water, dry it with a paper towel. Do not use glue/hairspray on a textured PEI plate when printing PLA, glue is a release agent and does not improve adhesion.
- Dry your filament, even brand new filament can/will be wet. Dry for at least 8hrs at 50C.
- Tune your filament: flow ratio in particular is important.
| Date published | 31/07/2024 |
| Precio | $4.00 |
| Tecnología | FDM |
| Sin apoyo | YES |
Printed with DudV2 Fast Rainbow