Tanks for the great design! First attempt with acrylic painting.

ABS print, smoothed with acetone vapor, painted with enamel and acrylics.

Another one :D

0.1mm layers painted with acrylics. A made a group of figures from Fallout Universe with similar scales (aaskedals MR handy (50% size) and Fallout joe

Thanks for the well executed model! Would love to print out each variety of protectron. Would you happen to have the other hand models?

:)

printed with hatchbox black pla.

Awesome model. Had a load of fun printing and painting this one. Remixed the head dome, arms and added internals for the head (remix incoming).

Printed on Elegoo Mars at 108% original size solid using Elegoo's grey resin. Airbrushed and hand painted using Vallejo acrylics and pigments. The heavily abbreviated painting workflow is as follows: The main bodywork was primed in grey followed by Vallejo's 'light turquoise' which was darkened slightly on subsequent coats. On the bodywork rust, oil streaks and other imperfections were added using blacks/browns. Hands and other metal areas were undercoated using black primer followed by gloss black and then metallic black. Which was then lightly hand painted with a coat of Vallejo 'rust', almost to the point of it becoming a wash. Metallic rust and finally a Vallejo pigment 'rust' was used for areas of heavy rust. Such as the feet, the areas below the leg rubber gaiters, in crevices in the hands, and a dozen other little nooks, you get the idea. The rubber gaiters were painted primed black, then painted gloss black, 'rust' pigment was worked into the cracks and wiped off to create a slightly dirty look. You could also use practically any brownish colour, applied lightly, and rubbing the excess off. For masking i used vallejos liquid mask and a lot of tape. I hate you tape ;) Stands tall at 20.5cm tall. Thanks ever so much Dan for taking the time to design the model. Especially by splitting him up into easily printable parts, which makes hiding any imperfections created by support material far less difficult.

Printed on a Mono X at 75%. Cut and shaped an acrylic dome. Great model thanks Daniel!

Printed at 200% for a 1/6 scale diorama. I scaled the files in Cura, and after assembly he stands 14" tall, which I feel is a little bit bigger than 1/6 scale. Added the dome and computer by buster2006.

Formlabs clear resin, 25 um layer thickness. Painted with acryllic paints, used some spare decals.

Printed on Elegoo Mars 3 with Elegoo plant-like resin (black and gray) Painted with Tamiya spray paints: TS-6 - Matt black TS-30 - Silver Leaf TS-78 - Field Gray TS-21 - Gold two coats of TS-80 Flat Clear

Protectron

My make; PLA and acrylic paint. I decided to do a "pristine" paint job because I really dug the "Patina" paint by Revell. Turned out to be about 7" tall; I'm 99% sure I didn't change the scale... I put shims (brim fragments) in the elbows, waist, hips, and thigh joints to tighten them, but glued the knees to the feet, Wrists and shoulders fit snugly.